AEM 400LPH Metric Inline High Flow Fuel Pump
AEM 400LPH Metric Inline High Flow Fuel Pump
$184.00
$164.95
- For N/A and forced induction vehicles
- Mounted in-line
- Can be used for alcohol fuels
Description
AEM’s 400lph Metric High Flow, high pressure Inline Fuel Pump (PN 50-1009) is the perfect direct replacement upgrade for 044 pump users who want more fuel flow for their high performance vehicle! The 400lph Metric High-Flow Inline Fuel Pump has an M18X1.5 female inlet and M12x1.5 male outlet. It utilizes the industry standard “044 Style” envelope. It is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400lph (105 gph) at 40 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available on the Specs tab. The AEM 400lph Metric High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels. Features:
- Designed for high output naturally aspirated and forced induction EFI vehicles
- Popular “044 Style” physical configuration with metric fittings for direct replacement of 044 pumps!
- Maintains very high flow even at boosted fuel pressures; 340 lph at 73 PSI (30 psi boost)
- Each pump individually tested to flow minimum of 400lph (105gph) at 40 PSI
- Compatible with Flex Fuel (E85/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)
- Kit includes fuel pump, check valve fitting, terminal nuts & boots, instructions
*Power rating given using gasoline and assuming a base fuel pressure of 43 PSI, 13.5v at the pump, 6.2 lbs/gal with a BSFC of 0.65. Boost fuel pressure is assumed to be the base pressure of 43 PSI + boost pressure. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
Specifications
| Location | External | See more like this |
|---|---|---|
| Flow Rate | 400lph | See more like this |
| Input Fitting | M18X1.5 | See more like this |
| Output Thread | M12X1.5 | See more like this |
| Fitment kit included | Yes | See more like this |
| Fitment | Universal | See more like this |
Details
| Made by | AEM Electronics |
|---|---|
| Manufacturer Part # | 50-1009 |
| Country of Manufacture | China |
| GTIN | 840879025892 |
| Weight | 1.98 lbs (0.9 kg) |
| Height | 3.5" (8.9 cm) |
| Width | 3.5" (8.9 cm) |
| Length | 10" (25.4 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
