415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$1,056.00
$949.95
Let your turbo breathe with this massive 4" inlet system.
More details | Click to see if this fits my vehicleSKU #: APR-1CI100038
Manufacturer Part #: CI100038
The APR Turbocharger Inlet System outflows the factory components by up to 45%, and jumps to 60% when adding the APR Intake Filter. This is firstly achieved through elimination of the most critical restriction in the entire intake system, the turbocharger inlet pipe. Because of this restriction, no intake airbox / filter design can physically match the gains achieved by upgrading to the APR Turbo Inlet System alone. This inlet is the first step one should take when upgrading their intake system and paves the way for even more gains by adding the optional intake filter. The APR Turbocharger Inlet System uses a massive 4" carbon fiber inlet tube that attaches to the factory airbox, or the APR Intake Filter System. Attached to the carbon fiber tube is a massive 4" cast aluminum inlet which is organically shaped to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Despite the visually odd shape, keeping the cross-sectional area as large as possible is the key to the pipe's performance gains, and greatly outflows smooth looking continuously tapering designs. Interlocking adapter rings form a port-matched ideal entrance to the turbocharger, while larger rings (sold separately) provide port-matched support for even larger hybrid turbocharger upgrades. A thick stainless-steel heat shield protects the pipe from the hot turbocharger manifold, and an external stainless PCV pipe provides proper PCV placement without impacting the inlet's design. Finally, adding the optional APR Intake Filter completely transforms the system from subtle to extreme. Our massive 9" long cotton filter with frontal opening connects to a 6" carbon fiber inlet tube that gradually necks down to the 4" back tube. You will hear every ounce of the 5-cylinder turbocharger system's massive demand for airflow, and you'll do so at a 60% CFM improvement over stock! This was only possible with an open filter system as the airflow demands called for an unboxed design. Simply put, this is the best intake system on the market for satisfying uncompromisingly demanding airflow requirements.
This product cannot be shipped to California.
Year | Make | Model | Trim | Notes |
---|---|---|---|---|
2017 | Audi | RS3 | Rear | |
2018 | Audi | RS3 | Rear | |
2019 | Audi | RS3 | Rear |
Made by | APR |
---|---|
Manufacturer Part # | CI100038 |
GTIN | 810009930808 |
Weight | 10.00 lbs (4.5 kg) |
Height | 24" (61.0 cm) |
Width | 14" (35.6 cm) |
Length | 10" (25.4 cm) |
CARB compliant | No (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.