415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$2,223.00
$1,999.95
Stainless Steel - Polished Tips - E60
More details | Click to see if this fits my vehicleSKU #: DIN-D660-0009A
Manufacturer Part #: D660-0009A
The Dinan M5 Axle-Back exhaust system provides maximum flow characteristics for optimum power gains while producing a civilized yet very sporty exhaust note that is appropriately aggressive at wide-open throttle. And there's none of that irritating low RPM ''drone'' that is common with so many aftermarket mufflers. The mufflers are manufactured from 100% 304 stainless steel inside and out for maximum resistance to corrosion and nearly a 30% reduction in weight eliminating over 20 lbs.
The four 3.5'' diameter polished, or ceramic black, stainless steel tips not only give the car a more aggressive look but also feature Dinan's new ''Cool Tip'' design that effectively reduces temperatures in order to minimize radiant heat that can affect bodywork over time, as well as avoid discoloration of the tips themselves. The Cool Tips also avoid the possibility of a nasty burn while loading items in the trunk. Employing the principle of rarefaction, the design features an inner and outer tip with a vent at the base. When a positive pressure wave travels to the end of an open pipe and is ultimately expelled into the atmosphere, a rarefaction or momentary drop in the density of the surrounding air is created behind it. This momentary drop in the density of the air surrounding the pipe's exit creates a vacuum, pulling the air from the surrounding area to fill the void. The vent at the base of each outer tip then enables air to be drawn in effectively cooling the tips.
Utilizing the factory brackets and hangers the Dinan exhaust mounts in a factory-like fashion for a perfect fit and clean installation.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Year | Make | Model | Trim | Notes |
---|---|---|---|---|
2006 | BMW | M5 | Base | |
2007 | BMW | M5 | Base | |
2008 | BMW | M5 | Base | |
2009 | BMW | M5 | Base | |
2010 | BMW | M5 | Base |
Made by | Dinan |
---|---|
Manufacturer Part # | D660-0009A |
GTIN | 813725021461 |
Weight | 72.00 lbs (32.7 kg) |
Height | 30" (76.2 cm) |
Width | 11" (27.9 cm) |
Length | 48" (121.9 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.