415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
One of the biggest improvements you can make to gain tire grip is stiffening your chassis. A stiffer chassis allows the suspension, like the springs, shocks and sway bars to do their job as intended.
Keeping the tires in better contact with the ground equals more grip. Short of adding a full roll cage, the addition of the newly redesigned M7 Rear Chassis Brace to the M7 Under Chassis Brace System and the M7 Strut Tower Brace and you will have the best handling MINI on the street or track.
The M7 Rear Chassis Brace features a fully triangulated design, lightweight race car construction and is super easy to install
During hard cornering, the MINI is prone to chassis flex that results in excessive oversteer, poor handling characteristics and the need for the driver to compensate. M7 offers a way to fix this problem with the M7 Rear Chassis Brace (RCB).
This easy to install bolt-in kit is perfect for enthusiasts who want a stiffer chassis but don't need a fully fabricated roll cage. The new design features a fully triangulated design for maximum chassis stiffness, lightweight construction and threaded connection points making it easy to adjust gap and preload.
Besides the benefit of more predictable handling, the M7 Rear Chassis Brace still allows use of the rear seats. Unlike a roll cage, there are no harness bars or cross members impeding access to the rear seats.
Handling without sacrifice of passenger space. The M7 Rear Chassis Brace is the perfect addition to the ultimate street performance MINI or MINI track car.
The M7 Speed RCB kit includes all necessary hardware, parts and easy to follow instructions. This is an easy 30 minute bolt-in installation.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
|Manufacturer Part #
|6.00 lbs (2.7 kg)
|5" (12.7 cm)
|5" (12.7 cm)
|36" (91.4 cm)
|Yes (see note below)
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.