415-767-6905 | firstname.lastname@example.org
There was an error
If you believe this is incorrect, please contact us at email@example.com.
100 percent silicone four-ply fiber reinforced intake hose for all MINIs equipped with the later model N18 turbocharged Prince engine. Offered in the four standard M7 colors (Black, Red, Blue and Green).
The M7 High Flow Intake Hose kit is the only one on the market that includes two electronic replicators necessary to keep the CEL (check engine light) off when using a non-OE part. Over 10,000 miles of testing were completed to prove the robustness and performance of this part. It features two PCV hose connections and eliminates the problematic OE reducer bushing found at the intake hose/turbocharger connection.
The common occurring event of sucking this part through the turbo and causing thousands of dollars in damage has been eliminated by installing the M7 N18 intake hose. Zero modifications are necessary for the install making this a true direct-fit bolt-on part for any late model Gen 2 MINI equipped with the N18 engine.
In addition to outstanding performance and the aforementioned design improvements it looks super cool and adds the under hood WOW factor MINI so desperately need.
The kit comes complete with two electronic plug-in replicators, four properly sized stainless steel clamps, one cap (for models not equipped with the secondary vent hose) and easy to follow installation instructions.
The intake hose is also offered in bundled kits for the R55 through R59 models and the R60-R61 models. These kits include the N18 intake hose, the cold-side elbow kit (56-33020X) and the hot-side turbo charge pipe (56-3M710X or 60-3M710X).
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
|Manufacturer Part #
|3.00 lbs (1.4 kg)
|6" (15.2 cm)
|6" (15.2 cm)
|24" (61.0 cm)
|Yes (see note below)
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at firstname.lastname@example.org. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.