415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
The M7 Pre-Intercooler Charge Pipe for the R60-R61 MINI platform is a high flow 100 percent silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM hose has an inline muffler designed from the factory to silence any turbo sound by breaking up the air path with restrictive piping and baffles.
Installing the M7 Pre-Intercooler Charge Pipe eliminates the restrictive factory muffler. The pressurized charge air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted free flowing airflow to the intercooler.
The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it!
On the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 4 horsepower and 11.3 ft-lb of torque at the wheels!
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
|Manufacturer Part #
|3.00 lbs (1.4 kg)
|6" (15.2 cm)
|6" (15.2 cm)
|24" (61.0 cm)
|Yes (see note below)
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.