415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$96.54
$86.89
1998-2002 Camaro / Firebird with T-56
More details | Click to see if this fits my vehicleSKU #: HOL-2319-306
Manufacturer Part #: 319-306
Now that you've found that T-56 transmission to put into your 1998-2002 Camaro/Firebird, it's time to finish up installing the clutch.
One of the items that will need to be upgraded is the hydraulic clutch line. The hydraulic clutch line is responsible for transporting hydraulic fluid going from your clutch master cylinder to your clutch slave cylinder by increasing fluid pressure to disengage the clutch and decreasing pressure to engage the clutch
You will want a line that is durable enough to stand up to the test that lies ahead with years of future use and abuse associated with a pressurized line constantly under pressure, along with road debris, and then the rigors of spirited driving.
The high flow line will serve as a direct replacement for the factory line and allows for not only increased fluid capacity, but the braided steel line construction will improve clutch pedal feel by minimizing expansion and contraction of fluid within the line that commonly occurs with most factory style plastic/polymer lines.
To make installation a snap, a roll pin and o-ring are included.
Year | Make | Model | Trim | Notes |
---|---|---|---|---|
1998 | Chevrolet | Camaro | Z28 | 24 in.; Braided Steel |
1999 | Chevrolet | Camaro | Z28 | 24 in.; Braided Steel |
2000 | Chevrolet | Camaro | Z28 | 24 in.; Braided Steel |
2001 | Chevrolet | Camaro | Z28 | 24 in.; Braided Steel |
2002 | Chevrolet | Camaro | Z28 | 24 in.; Braided Steel |
1998 | Chevrolet | Camaro | Z28 SS | 24 in.; Braided Steel |
1999 | Chevrolet | Camaro | Z28 SS | 24 in.; Braided Steel |
2000 | Chevrolet | Camaro | Z28 SS | 24 in.; Braided Steel |
2001 | Chevrolet | Camaro | Z28 SS | 24 in.; Braided Steel |
2002 | Chevrolet | Camaro | Z28 SS | 24 in.; Braided Steel |
1998 | Pontiac | Firebird | Formula | 24 in.; Braided Steel |
1999 | Pontiac | Firebird | Formula | 24 in.; Braided Steel |
2000 | Pontiac | Firebird | Formula | 24 in.; Braided Steel |
2001 | Pontiac | Firebird | Formula | 24 in.; Braided Steel |
2002 | Pontiac | Firebird | Formula | 24 in.; Braided Steel |
1998 | Pontiac | Firebird | Trans Am | 24 in.; Braided Steel |
1999 | Pontiac | Firebird | Trans Am | 24 in.; Braided Steel |
2000 | Pontiac | Firebird | Trans Am | 24 in.; Braided Steel |
2001 | Pontiac | Firebird | Trans Am | 24 in.; Braided Steel |
2002 | Pontiac | Firebird | Trans Am | 24 in.; Braided Steel |
Made by | Holley |
---|---|
Manufacturer Part # | 319-306 |
GTIN | 090127046418 |
Weight | 0.45 lbs (0.2 kg) |
Height | 3.8" (9.7 cm) |
Width | 5" (12.7 cm) |
Length | 9.8" (24.9 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.