415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$49.00
$46.55
OD: 2-3/4" (70mm). 15 Degree Bend. CLR: 4-5/16". Leg Length on each side: 6". HPS 6061 Aluminum 16 Gauge elbow pipe is commonly used in industrial, automotive, marine and aerospace industry; Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping setup.
More details | Click to see if this fits my vehicleSKU #: HPS-AT15-275-CLR-43
Manufacturer Part #: AT15-275-CLR-43
HPS 2.75" 15 Degree Bend 6061 Aluminum Elbow Tubing 16 Gauge with 6" Leg Length and 4-5/16" Center Line of Radius is commonly used in industrial, automotive, marine and aerospace industry; Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping setup because 6061 aluminum is the most popular and versatile alloy, and is the least expensive of the heat treatable aluminum alloys. HPS 2-3/4" (70mm) 15 Degree Bend aluminum round tubing is sold in the T6 condition, ideal for sawing, machining, sanding, and polishing. HPS 15 Degree Bend aluminum elbow pipe can be polished, but due to the softness of the aluminum, care must be taken not to remove too much material, especially in the area near any welds.
Technical Specification- Product Type: 15 Degree Bend Aluminum Elbow
- Material: 16 Gauge 6061-T6 Aluminum
- Tubing Outside Diameter: 2-3/4" (70mm)
- Wall Thickness: 0.065" (1.65mm)
- Leg length on each side: 6"
- Center line of radius: 4-5/16"
Remark: HPS does NOT recommend 6061 Aluminum to be used for exhaust systems.
Material | 6061-T6 aluminum | See more like this |
---|---|---|
Wall Thickness | 16 Gauge | See more like this |
Outside Diameter | 2 3/4" | See more like this |
Length | 1 Foot | See more like this |
Manufacturer Part # | AT15-275-CLR-43 |
---|---|
GTIN | 648044823652 |
Weight | 2.00 lbs (0.9 kg) |
Height | 6" (15.2 cm) |
Width | 6" (15.2 cm) |
Length | 14" (35.6 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.