415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$1,367.00
$860.97
V8 Holley Dominator; 2-Stage Kit; 250 HP Max; w/10 lb. Bottle;
More details | Click to see if this fits my vehicleSKU #: NOS-202202NOS
Manufacturer Part #: 02202NOS
NOS Sometimes the application of too much power can be detrimental to a good launch. This is especially so when the vehicle chassis or prevailing track conditions contribute to a loss of traction. These are times when you need the help of a NOS(R) Dual Shot Cheater(TM) system to maximize performance from the starting line, all the way through the lights. It's like having two systems in one. The first stage is activated by a throttle switch on the carburetor and includes Jets to add anywhere from 100–150 extra horsepower. Then, when the tires are fully hooked up, the driver can activate the second stage with a push of a button, or add a delay timer 15838NOS for the ultimate in consistency. The second stage immediately takes over and provides an extra 150 to 250 horsepower. Changing conditions can easily be accommodated simply by changing the nitrous jets, which takes just seconds to accomplish. The Dual Shot Cheater(TM) system incorporates two Super Powershot(TM) solenoids for the first stage and two Cheater(TM) solenoids for the second stage. The system includes a variety of power Jets that can be used to reduce nitrous power output to as low as 50 horsepower. Other components included with the systems are a 10 pound nitrous bottle, 1/2 inch injector plate, aircraft quality steel braided hose, and all necessary electrical and mounting hardware for a complete installation. This system is intended for use on V8 engines with a minimum displacement of 350 CID. For best results, a single plane intake manifold should be used.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Made by | NOS |
---|---|
Manufacturer Part # | 02202NOS |
GTIN | 090127492239 |
Weight | 31.00 lbs (14.1 kg) |
Height | 10" (25.4 cm) |
Width | 10" (25.4 cm) |
Length | 25" (63.5 cm) |
CARB compliant | No (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.