Nuke Performance Competition Fuel Cell Unit – OPEN BOX
Nuke Performance Competition Fuel Cell Unit – OPEN BOX
$614.00
$521.90
- Puts surge tank inside fuel cell eliminating many fuel lines
- Fits most popular fuel cells with standard 6″ x 10″ fill plate
- Use with single or dual internal fuel pumps from Deatschwerks or Walbro
- Single AN-8 or AN-10 high pressure output
- This is an OPEN BOX Item
Description
This is an Open Box item. Everything is included but box has been opened.
This is a 24 bolt fuel cell fill plate replacement that contains a built in Fuel Surge Tank for single or dual internal fuel pumps, such as DW300, DW400, Walbro GST450, Walbro GST 520 or any standard 39mm pump. It gives you a light weight and space efficient installation with minimum fuel piping and a easy-to-use setup. It really simplifies the setup and reduces the failure points in fuel system plumbing.
The Nuke Performance Competition Fuel Cell Unit (CFC) is a fill plate replacement for fuel cells from market leading manufactures including ATL, FuelSafe, Jaz, Harmon, Pyrotect and several others. It has a 6*10″ design with the standardized 24 bolt pattern to fit most manufacturers fuel cells. The minimum mounting depth of the fuel cell is 8.62″ (219mm).
The output of the two internal pumps is combined into one 7/8 AN-8 / AN-10 outlet with both fittings included. This allows the fuel tank to deliver steady fuel flow even for engines over 1400 HP. For the lift pump (pickup pump), the well known electrical connectors makes it possible to choose from almost any pump. The CFC’s surge tank has the well-known Nuke billet brackets and with this kit you get both the bracket for 39mm fuel pumps as well as the bigger one for Deatschwerks DW400 pumps.
Delivered with everything you need for a 1+1 or a 1+2 fuel pump installation and with both AN-8 and AN-10 fitting for the fuel line. It also comes with a AN-6 fitting with roll-over valve for ventilation. The fuel filler is integrated into the unit and comes with a billet aluminum cap. Alternatively, an adapter can be purchased to connect to fuel filler necks. Designed to stand up to the destructive properties of alcohol fuels, including methanol and ethanol. Fuel pumps are not included.
Details
| Manufacturer Part # | 150-05-201 |
|---|---|
| Country of Manufacture | Sweden |
| Weight | 11.01 lbs (5.0 kg) |
| Height | 10″ (25.4 cm) |
| Width | 6″ (15.2 cm) |
| Length | 6″ (15.2 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
relatedproducts
