415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$1,312.00
$991.16
Racepak Aluminum Low Flow Meter; 5/8 in.; Constructed Of Aluminum; Methanol Fuel Requires The Use Of Stainless Steel Flow Meter; Provides Accurate Flow Readings;
More details | Click to see if this fits my vehicleSKU #: RCP-800-FM-AN10-LAL
Manufacturer Part #: 800-FM-AN10-LAL
Racepak This general purpose turbine-type flow meter provides accurate flow readings for both fuel and hydraulic clutch systems. Use of a flow meter and DataLink's math channel capabilities allows you to monitor the health of your fuel pump as well as confirm the function of your fuel system timers and system lean-outs. Flow meters designated as Low Flow are recommended for carbureted applications and are calibrated in Lbs/Hr unless otherwise noted. Gasoline and Nitromethane flow meters are constructed of aluminum. Methanol fuel requires the use of a stainless steel flow meter.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Made by | Racepak |
---|---|
Manufacturer Part # | 800-FM-AN10-LAL |
GTIN | 815046026354 |
Weight | 0.50 lbs (0.2 kg) |
Height | 6" (15.2 cm) |
Width | 0.5" (1.3 cm) |
Length | 7" (17.8 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.