415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
The Reverie Super Sports B Carbon Fiber bucket seat is FIA 8855-1999 approved and trimmed in black FIA spacer fabric. This seat has a very snug feel to it from the shape of the upper lip and is one of the lightest FIA seats on the market. Large shoulder strap holes accommodate various driver heights and the broad carbon fiber weave really pops to anyone who's never seen it before.
This is a universal fit seat, but can fit a Lotus Elise. To use a Super Sports seat on the passenger side of a Lotus, use a twin skin in that side of the vehicle or remove the handbrake center tunnel if it is a racing oriented car, to allow room. Note: this seat is very slightly wider than the twin skin seat, this single skin will only fit Lotus chassis on the drivers side.
Universal fitment using 288mm side hole centers, the bare shell weight 3.7kg, fully trimmed weight is 5.4kg / 11.9 lbs.
Please note the following disclaimer provided by Reverie and which applies to all Reverie products:
|Manufacturer Part #||R01SI0106|
|Country of Manufacture||United Kingdom|
|Weight||11.01 lbs (5.0 kg)|
|Height||43.3" (110 cm)|
|Width||19.7" (50 cm)|
|Length||21.7" (55 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.