Seat Accessories

• Lowest strap mount possible
• Mountable at 10°- 20° for OEM seats
• Fits all 991, 981, 718 chassis models

• Manufactured from premium materials
• Designed to strict quality standards
• Will last a lifetime

Sub strap mount attaches to PCI bases

• Universal application
• Can be paired with any number of seats and chassis adapters

Harness mount reinforcement backing plate to prevent bolt ripping through floor.

Use to mount aftermarket seats to Planted adapter brackets consisting of 8x bolts, nuts & washers.

Spacer to raise seats from most major brands by 1/4″. Sold as pair.

Use to mount aftermarket seats to seat side mounts. Contains 4x bolts, nuts & washers.

Universal sliders for use with most racing seats.

• Side cushions for thigh area to fit thinner drivers
• Fits Racetech 4009, 4119 and 4129 series seats

Strengthens the bracket where angle adjustment slots are used on a car seat bracket.

Backing plate, filler and Dinamica fabric for a B1 seat headrest panel. Allows for local customization by embroider.

Backing plate, filler and Dinamica fabric for a B10 seat headrest panel. Allows for local customization by embroider.

Backing plate, filler and Dinamica fabric for a B5 seat headrest panel. Allows for local customization by embroider.

Backing plate, filler and Dinamica fabric for a B6 or B6 Screamer seat headrest panel. Allows for local customization by embroider.

Backing plate, filler and Dinamica fabric for a B8 seat headrest panel. Allows for local customization by embroider.

Backing plate, filler and Dinamica fabric for a B9 seat headrest panel. Allows for local customization by embroider.

Custom color on back and/or front of Tillett seats

Black washer for use with M6 countersunk screws

Nylon mounting spacer. 40mm diameter. 10mm thick.

Nylon mounting spacer. 40mm diameter. 2mm thick.

Nylon mounting spacer. 40mm diameter. 4mm thick.

Nylon mounting spacer. 51mm diameter. 10mm thick.

Nylon mounting spacer. 51mm diameter. 2mm thick.

Nylon mounting spacer. 51mm diameter. 5mm thick.

• 31.5 cm hole centers
• Double locking
• Use with inboard mounted Tillett brackets

• 31.5 cm hole centers
• Double locking
• Use with outboard mounted Tillett brackets

• Compatible with most Tillett seat brackets
• Direct bolt onto bottom-mount seats
• Formerly part number TR1

• 90 mm wider version of STRI
• Use with outward-facing bracket installs or XL width seats

Allows a slider to be mounted underneath the B6, W1 and W2 seats where the mounting holes are on the underside of the seat.

• 90 mm wider version of TR1
• Use with outward-facing bracket installs or XL width seats

• Universal installation and application
• 7/16” UNF thread
• 3 x 2 x 0.5 Inches
• FIA compliant

• Raises seat about 1″ in the front
• 6061-T6 billett aluminum
• Use with Porsche LWB seats as found on GT3, GT3RS & GT4
• Available in black or natural finish

• Universal installation and application
• 7/16” UNF thread
• 65mm x 65mm x 3mm
• FIA compliant