There was an error
The error has been logged. Please contact us at email@example.com and we'd be happy to assist you further.
Formula-style seating position. Narrow construction for fitment into many specialized cars. Available in Carbon/GRP or black GRP and with edges on or off.
SKU #: TIL-B4
The B4 seat weighs 4.9 kg and has been made to allow fitment into some of the narrowest vehicles around. Although light, it is still rigid due to its twin skin construction and it holds the driver in a reclined “formula-style” racing position. The seat is available in carbon GRP or black/GRP finish, as well as with the edges left on or cut off to be even narrower.
The belt holes in the B4 allow a full 5/6-point racing harness to be used, which is strongly recommended on any reclined seat such as this. The B4 seat is not generally compatible with OEM 3-point belts since it is very hard to feed the lap belt through the lap belt holes and click it into the OEM receptacle, much less the danger of "submarining" due to lacking a center strap.Furthering it’s performance pedigree, the shoulder holes have been optimized to enable the use of a HANS device.
The B4 comes complete with a Dinamica® suede covered headrest. Matching padded cushion and back panels are available at extra cost. However, the shape is so comfortable covering is unnecessary, making it ideal for open topped sports cars. The B4 has six M8 mounting points; two are up high at chest level and give more mounting options to the chassis.
The four lower mounting points are for bracket options including:
|Weight||10.8 lbs (4.9 kg)|
|Height||29.9" (76 cm)|
|Width||16.5" (42 cm)|
|Length||31.9" (81 cm)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us at firstname.lastname@example.org.