415-767-6905 | firstname.lastname@example.org
There was an error
If you believe this is incorrect, please contact us at email@example.com.
The TBB5 side mounted brackets are designed for the B5 car seat in road, race and track applications. They are made from 5 mm thick aluminium and allow the seats to be tipped, raised and lowered. TBB5 brackets are bent at exactly 90 degrees and therefore can point inwards or outwards. They are a less tall version of the TBB5 brackets and are typically used to not gain extra height in an application where at TR1 seat slider is needed. If you intend to run the brackets facing outwards, use the STRO sliders instead of STRI. A common configuration is to use the TBB5T brackets to hard mount the passenger seat and use the TBB5 & STRI combination to allow the driver seat to slider. Alternatively, the TBB5 brackets can also be used without a slider in applications with an uneven floor that is lower between the mounting points, allowing the round bottom of the B5 seat to "dip" below the plane of the mounting points.
|Manufacturer Part #||TBB5|
|Country of Manufacture||United Kingdom|
|Weight||2.50 lbs (1.1 kg)|
|Height||4.5" (11.4 cm)|
|Width||2.5" (6.4 cm)|
|Length||14.5" (36.8 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at firstname.lastname@example.org. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.