DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than sandard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 30 Degree AN-8 fitting can be used to connect to any CPE (synthetic rubber) hose to an AN-8 component.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.
This 180 degree AN-8 fitting can be used to connect to any PTFE (teflon) fuel hose to any AN-8 component. A ferrule is included to create a high pressure leak free seal.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 180 degree AN-8 fitting can be used to connect to any CPE (synthetic rubber) hose to an AN-8 component.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than sandard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 120 Degree AN-8 fitting can be used to connect to any PTFE hose to an AN-8 component.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than sandard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 120 Degree AN-8 fitting can be used to connect to any CPE (synthetic rubber) hose to an AN-8 component.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This coupler will join a 8AN Male fitting to another 8AN Male fitting implicating a swivel in the junction.

All couplers can be installed anywhere in-line, and as long as they installed properly they will not leak and can with-stand years of high volume flow and demand for delivery.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This coupler will join a 8AN Male fitting to another 8AN Male fitting implicating a swivel in the junction at a 90 degree angle.

All couplers can be installed anywhere in-line, and as long as they installed properly they will not leak and can with-stand years of high volume flow and demand for delivery.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This coupler will join a 8AN Male fitting to another 8AN Male fitting implicating a swivel in the junction at a 45 degree angle.

All couplers can be installed anywhere in-line, and as long as they installed properly they will not leak and can with-stand years of high volume flow and demand for delivery.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Chlorinated Polyethylene (CPE) hoses are lined for compatibility with ethanol-based fuels up to E85. They are also cord reinforced for high pressure up to 350 psi in black nylon.

Part number 6-02-0816-3 is 3 ft of CPE hose, AN-8 size with black nylon exterior. See spec sheet for further details and other Deatschwerks hose options.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This is a 6AN one way check valve designed to permit flow one way but not the other. Examples of applications would include at the end of your fuel rail to allow return to the tank but retain pressure when shut off.

All couplers can be installed anywhere in-line, and as long as they installed properly they will not leak and can with-stand years of high volume flow and demand for delivery.