This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. This version fits the following cars:

• Front – BMW-3 Series-E36 M Coupe (2001-2002)
• Front – BMW-3 Series-E46 3-series (2001-2005)
• Front – R55 Clubman (08-10)
• Rear – BMW-3 Series-E36 M Coupe (2001-2002)
• Rear – BMW-3 Series-E46 3-series (2001-2005)
• Rear – BMW-Z Series-E36 Z3M, Z3 M-Sport nose (1996-2002)
• Rear – BMW-Z Series-E52 Z8 (1999-2003)
•  

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. Please contact us before ordering so we can confirm fitment for you. Have your year, make and model readily available please.

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. This version fits the following cars:

• Porsche Panamera Front

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. This version fits the following cars:

• Porsche 981 Boxster Spyder Front 2015+
• Porsche 981 Cayman GT4 Front 2015+

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization.

Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact.

Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately.

This version fits the following cars:

• Porsche 991 Front including Turbo, GT3 & GT3 Cup
• Porsche 981 Boxster Front except Spyder
• Porsche 981 Cayman Front except GT4
• Porsche 718 Front

Looking for a place to conveniently and safely store your phone in the car? The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with their ExactFit Screw-in Magnetic phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of the mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. The ball clasp provides an adjustable yet very firm grip, keeping the phone in the position you want. This phone mount will work with all 2014+ Porsche Macan, and the face-lifted 2019+ Macans.

Looking for a place to conveniently and safely store your phone in the car? The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with their ExactFit Screw-in Magnetic phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of the mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. The ball clasp provides an adjustable yet very firm grip, keeping the phone in the position you want.

Looking for a place to conveniently and safely store your phone in the car? The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with their ExactFit Screw-in Magnetic phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of the mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. The ball clasp provides an adjustable yet very firm grip, keeping the phone in the position you want.

Looking for a place to conveniently and safely store your phone in the car? The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with their ExactFit Screw-in Magnetic phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of the mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. The ball clasp provides an adjustable yet very firm grip, keeping the phone in the position you want.

Looking for a place to conveniently and safely store your phone in the car? The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with their ExactFit Screw-in Magnetic phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of the mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. The ball clasp provides an adjustable yet very firm grip, keeping the phone in the position you want.