Reverie Eclipse 315 Carbon Steering Wheel – MOMO/Sparco/OMP Drilled, Untrimmed
Reverie Eclipse 315 Carbon Steering Wheel – MOMO/Sparco/OMP Drilled, Untrimmed
$1,098.66
- Carbon Fiber
- MOMO/ Sparco/ OMP drilled
- 75% lighter than equivalent wheels
Description
The Reverie Eclipse 315 Carbon Fibre steering wheel is Autoclave cured as a single piece, improving stiffness & reducing inertia. Weighs up to 75% less than an equivalent size alloy wheel. The steering wheel features a solid centre with hollow spokes and rim with a 32.3 x 28.3mm oval section (grip areas bulge to a max of 32 x 32mm at 10 & 2 o’clock) with 16.5mm set back. The PCD (Pitch Circle Diameter) centre drilling is 70mm and consists of 6 holes placed at 12, 2, 4, 6, 8 and 10 O’Clock. Please note the following disclaimer provided by Reverie and which applies to all Reverie products:
Specifications
| Diameter | 315mm | See more like this |
|---|---|---|
| Dish | 16mm | See more like this |
| Bolt Pattern | 6 x 70mm | See more like this |
| Horn Button | Yes | See more like this |
Details
| Manufacturer Part # | R01SH0001 |
|---|---|
| Country of Manufacture | United Kingdom |
| Weight | 0.51 lbs (0.2 kg) |
| Height | 1.2″ (3 cm) |
| Width | 13.0″ (33 cm) |
| Length | 11.0″ (28 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
