GP-6 series shield with uncoated space for Carbon/Zylon visor panel.

WARNING: do not wipe off the coated surface as it damages the coating. Never use petrol, thinner, benzene, or any other solvents or spray-on cleaners.

GP-6 series shield with a D-Pane shaped seal to protect against harsh weather

This is the Light version

GP-6 series shield with a D-Pane shaped seal to protect against harsh weather

This is the Clear version

GP-6 Series shield with anti-fog laminated film. Fits all SA rated GP models with the “6” designation.

This is the light tint version.

A favorite for sedan and stock car racers, the GP-5W offers a wider eyeport and lightweight construction making for a durable and versatile helmet. Head and Neck Restraint devices with the standard 6mm helmet bolt can be easily added with the new M6 washer nut installed at the factory. The helmet is SA2020 certified. This is the white S version.

ScLc Construction It’s constructed of Arai’s exclusive, very-lightweight ScLc shell technology (Super Complex Laminate Construction), so it maintains a low overall weight to offset the added weight of the larger shield.

Shell Shape It has a smaller, more “natural” head shape, and a lower center of gravity to balance and stabilize the helmet so it feels even lighter, thereby helping to reduce fatigue.

Interior Fit The interior fit is typical Arai, benefitting from over 50 years of research and refinement, and resulting in a helmet that, as mentioned previously, more closely matches the shape of the human head. The first is snug, allowing for the smallest possible helmet to be worn while still being comfortable.

Wider Eyeport Larger 90mm eyeport, top to bottom, than comparable Arai models, provides a better vertical view desired by many sedan drivers. For drivers not needing a shield, a visor peak option is available.

Removable/Replaceable Cheekpads The cheekpads are removable and washable for easier cleaning. More importantly, they’re replaceable with optional sizes of varying thicknesses for a more custom, personalized fit.

VentilationThe upper ventilation system incorporates two large intake ducts and the same two exhaust vent ducts found on the GP-5(PED). This vent system allows for improved air flow even within the confines of a sedan or closed cockpit.

M6 Anchor Type Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.

Size Guide

Replacement shield for GP-5W helmets. Constructed of a 3mm Lexan coated composite.

This is the Light version.

Replacement shield for GP-5W helmets. Constructed of a 3mm Lexan coated composite.

This is the Dark version.

Replacement shield for GP-5W helmets. Constructed of a 3mm Lexan coated composite.

This is the Clear version.

Replacement shield for GP-5W helmets. Constructed of a 3mm Lexan coated composite.

Available in Clear, Light or Dark tints.