Author: torqued

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 1/16 x 25′

Posted on by torqued

Home
 » Exhaust & Header Wrap

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 1/16 x 25′

Design Engineering Black Titanium Exhaust Manifold Wrap 2" x 1/16" x 25'

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 1/16″ x 25′
Design Engineering Black Titanium Exhaust Manifold Wrap 2" x 1/16" x 25'
  Add 1 to Cart

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 1/16 x 25′

$33.89

$24.40


FREE
SHIPPING
  • Black Titanium color
  • 2″x 1/16 x 25′ roll

More details

IN STOCK: 3  ships tomorrow

SKU #: DEI-010018

Manufacturer Part #: 010018


Description

Design Engineering logo

Titanium Exhaust Wrap offers a few solutions to heat dissipation. With the promotion of increased heat flow for improved performance, this extremely pliable hi-tech carbon fiber design reduces temperatures and offers up to 1800ËšF direct/2500ËšF intermittent heat resistance.

Features:

  • DEI HT Silicone Coating not required
  • Pre-wetting roll not necessary for wrapping
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown

Specifications

Color Black See more like this
Width 2 inch See more like this
Length 25 ft See more like this
Kit or Single Single See more like this

Details

Manufacturer Part # 010018
GTIN 00607078100184
Weight 0.80 lbs (0.4 kg)
Height 2.25″ (5.7 cm)
Width 4″ (10.2 cm)
Length 4″ (10.2 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].

Free Shipping Details:
  • Applies to in stock items only
  • Valid in lower 48 US states, excluding HI, AK and US Territories
  • Ships via ground service


Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 25′

Posted on by torqued

Home
 » Exhaust & Header Wrap

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 25′

Black Exhaust Manifold Wrap

Black Exhaust Manifold Wrap
Black Exhaust Manifold Wrap

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 25′

$34.91

$25.14

Black color. 2″x25′ roll.

More details

Out of stock

SKU #: DEI-010004

Manufacturer Part #: 010004


Description

Design Engineering logo

Black Exhaust Wrap offers a few solutions to heat dissipation. With the promotion of increased heat flow for improved performance, this extremely pliable hi-tech carbon fiber design reduces temperatures and offers up to 1800ËšF direct/2500ËšF intermittent heat resistance.

Features:

  • Black carbon fiber look
  • DEI HT Silicone Coating not required
  • Pre-wetting roll not necessary for wrapping
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown

Specifications

Color Black See more like this
Width 2 inch See more like this
Length 15 ft See more like this
Kit or Single Single See more like this

Details

Manufacturer Part # 010004
GTIN 00607078100047
Weight 3.90 lbs (1.8 kg)
Height 2.5″ (6.4 cm)
Width 8″ (20.3 cm)
Length 8″ (20.3 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].


Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 50′

Posted on by torqued

Home
 » Exhaust & Header Wrap

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 50′

Black Exhaust Manifold Wrap

Black Exhaust Manifold Wrap
Black Exhaust Manifold Wrap

Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 50′

$80.22

Black color. 2″x50′ roll.

More details
 | Click to see if this fits my vehicle

Out of stock

SKU #: DEI-010003

Manufacturer Part #: 010003


Description

Design Engineering logo

Black Exhaust Wrap offers a few solutions to heat dissipation. With the promotion of increased heat flow for improved performance, this extremely pliable hi-tech carbon fiber design reduces temperatures and offers up to 1800ËšF direct/2500ËšF intermittent heat resistance. Features:

  • Black carbon fiber look
  • DEI HT Silicone Coating not required
  • Pre-wetting roll not necessary for wrapping
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown

Specifications

Color Black See more like this
Width 2 inch See more like this
Length 50 ft See more like this
Kit or Single Single See more like this

Fitment

This product fits the following cars:
Year Make Model Trim Notes

Details

Manufacturer Part # 010003
GTIN 00607078100030
Weight 1.90 lbs (0.9 kg)
Height 2.5″ (6.4 cm)
Width 8″ (20.3 cm)
Length 8″ (20.3 cm)
CARB compliant Yes (see note below)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.

CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.


Design Engineering Cool Tape 1.5″ x 15′

Posted on by torqued

Home
 » Heat Tape

Design Engineering Cool Tape 1.5″ x 15′

Cool Tape 1.5"x15'

Cool Tape 1.5″x15′
Cool Tape 1.5"x15'
  Add 1 to Cart

Design Engineering Cool Tape 1.5″ x 15′

$19.73

$14.21


FREE
SHIPPING

Heat Protection tape. 1.5″ x 15′ roll.

More details

IN STOCK: 2  ships Monday

SKU #: DEI-010408

Manufacturer Part #: 010408


Description

Design Engineering logo

Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is an ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

  • Withstands direct heat up to 400°F
  • Use to secure panels, seal air boxes, wrap wiring & more
  • Strong self-adhesive backing
  • Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look!

Specifications

Width 1.5 inch See more like this
Length 15 See more like this

Details

Manufacturer Part # 010408
GTIN 00607078104083
Weight 0.22 lbs (0.1 kg)
Height 3″ (7.6 cm)
Width 3″ (7.6 cm)
Length 3″ (7.6 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].

Free Shipping Details:
  • Applies to in stock items only
  • Valid in lower 48 US states, excluding HI, AK and US Territories
  • Ships via ground service


Design Engineering Cool Tape 1.5″ x 30′

Posted on by torqued

Home
 » Heat Tape

Design Engineering Cool Tape 1.5″ x 30′

Cool Tape 1.5"x30'

Cool Tape 1.5″x30′
Cool Tape 1.5"x30'

Design Engineering Cool Tape 1.5″ x 30′

$40.38

$30.29

Heat Protection tape. 1.5″ x 30′ roll.

More details
 | Click to see if this fits my vehicle

Out of stock

SKU #: DEI-010416

Manufacturer Part #: 010416


Description

Design Engineering logo

Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is an ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F Features:

  • Withstands direct heat up to 400°F
  • Use to secure panels, seal air boxes, wrap wiring & more
  • Strong self-adhesive backing
  • Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look!

Specifications

Width 1.5 inch See more like this
Length 30 See more like this

Details

Manufacturer Part # 010416
GTIN 0607078104168
Weight 0.37 lbs (0.2 kg)
Height 2″ (5.1 cm)
Width 7.25″ (18.4 cm)
Length 5.25″ (13.3 cm)
CARB compliant Yes (see note below)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.

CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.


Design Engineering Exhaust Manifold Heat Sheath 1.25″ x 3′

Posted on by torqued

Home
 » Heat Sleeves

Design Engineering Exhaust Manifold Heat Sheath 1.25″ x 3′

DEI Heat Sheath

DEI Heat Sheath

Heath Sheath

Heath Sheath
DEI Heat Sheath
Heath Sheath

Design Engineering Exhaust Manifold Heat Sheath 1.25″ x 3′

$21.26

$15.31

Heat protection for cables and sensor wires. 1.25″ x 3′ roll.

More details

Out of stock

SKU #: DEI-010404

Manufacturer Part #: 010404


Description

Design Engineering logo

Designed to slide over wires, cables and hoses, Heat Sheath™ provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath™ is fireproof and withstands direct heat up to 500°F.

Direct Heat Resistance: 500°F

Radiant Heat Resistance: 2000°F

Features:

  • Pliable for tight bends
  • Capable of withstanding 2000°F radiant heat
  • Trim to desired length

Specifications

Type Sleeve See more like this
Max Direct Heat 500 F See more like this
Diameter 1.25″ See more like this
Length 3′ See more like this

Details

Manufacturer Part # 010404
GTIN 00607078104045
Weight 0.22 lbs (0.1 kg)
Height 1.5″ (3.8 cm)
Width 10.25″ (26.0 cm)
Length 3.5″ (8.9 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].


Design Engineering Exhaust Manifold Heat Sheath 1.5″ x 3′

Posted on by torqued

Home
 » Heat Sleeves

Design Engineering Exhaust Manifold Heat Sheath 1.5″ x 3′

DEI Heat Sheath

DEI Heat Sheath

Heath Sheath

Heath Sheath
DEI Heat Sheath
Heath Sheath
  Add 1 to Cart

Design Engineering Exhaust Manifold Heat Sheath 1.5″ x 3′

$24.75

$12.37

Heat protection for cables and sensor wires. 1.5″ x 3′ roll.

More details

IN STOCK: 3  ships tomorrow

SKU #: DEI-010420

Manufacturer Part #: 010420


Description

Design Engineering logo

Designed to slide over wires, cables and hoses, Heat Sheath™ provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath™ is fireproof and withstands direct heat up to 500°F. Direct Heat Resistance: 500°F Radiant Heat Resistance: 2000°F Features:

  • Pliable for tight bends
  • Capable of withstanding 2000°F radiant heat
  • Trim to desired length

Specifications

Type Sleeve See more like this
Max Direct Heat 500 F See more like this
Diameter 1.5″ See more like this
Length 3′ See more like this

Details

Manufacturer Part # 010420
GTIN 00607078104205
Weight 0.22 lbs (0.1 kg)
Height 1.5″ (3.8 cm)
Width 10.25″ (26.0 cm)
Length 3.5″ (8.9 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].


Design Engineering Exhaust Manifold Heat Sheath 3/4″ x 3′

Posted on by torqued

Home
 » Heat Sleeves

Design Engineering Exhaust Manifold Heat Sheath 3/4″ x 3′

DEI Heat Sheath

DEI Heat Sheath

Heath Sheath

Heath Sheath
DEI Heat Sheath
Heath Sheath

Design Engineering Exhaust Manifold Heat Sheath 3/4″ x 3′

$16.40

$6.56

Heat protection for cables and sensor wires. 3/4″ x 3′ roll.

More details
 | Click to see if this fits my vehicle

Out of stock

SKU #: DEI-010403

Manufacturer Part #: 010403


Description

Design Engineering logo

Designed to slide over wires, cables and hoses, Heat Sheath™ provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath™ is fireproof and withstands direct heat up to 500°F. Direct Heat Resistance: 500°F Radiant Heat Resistance: 2000°F Features:

  • Pliable for tight bends
  • Capable of withstanding 2000°F radiant heat
  • Trim to desired length

Specifications

Type Sleeve See more like this
Max Direct Heat 500 F See more like this
Diameter 3/4″ See more like this
Length 3′ See more like this

Details

Manufacturer Part # 010403
GTIN 0607078104038
Weight 0.22 lbs (0.1 kg)
Height 1.5″ (3.8 cm)
Width 10.25″ (26.0 cm)
Length 3.5″ (8.9 cm)
CARB compliant Yes (see note below)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.

CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California will require and affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.


Design Engineering Exhaust Manifold Heat Sheath .5″ x 3′

Posted on by torqued

Home
 » Heat Sleeves

Design Engineering Exhaust Manifold Heat Sheath .5″ x 3′

DEI Heat Sheath

DEI Heat Sheath

Heath Sheath

Heath Sheath
DEI Heat Sheath
Heath Sheath
  Add 1 to Cart

Design Engineering Exhaust Manifold Heat Sheath .5″ x 3′

$14.87

$5.95

Heat protection for cables and sensor wires. .5″ x 3′ roll.

More details

IN STOCK: 4  ships TODAY

SKU #: DEI-010418

Manufacturer Part #: 010418


Description

Design Engineering logo

Designed to slide over wires, cables and hoses, Heat Sheath™ provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath™ is fireproof and withstands direct heat up to 500°F. Direct Heat Resistance: 500°F Radiant Heat Resistance: 2000°F Features:

  • Pliable for tight bends
  • Capable of withstanding 2000°F radiant heat
  • Trim to desired length

Specifications

Type Sleeve See more like this
Diameter .5 See more like this
Length 3′ See more like this

Details

Manufacturer Part # 010418
GTIN 00607078104182
Weight 0.22 lbs (0.1 kg)
Height 1.5″ (3.8 cm)
Width 10.25″ (26.0 cm)
Length 3.5″ (8.9 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].


Design Engineering Exhaust Manifold Locking Tie Tool

Posted on by torqued

Home
 » Tools

Design Engineering Exhaust Manifold Locking Tie Tool

Locking Tie Tool

Locking Tie Tool

Locking Tie Tool

Locking Tie Tool
Locking Tie Tool
Locking Tie Tool

Design Engineering Exhaust Manifold Locking Tie Tool

$6.29

$2.52

tool for Locking Ties

More details
 | Click to see if this fits my vehicle

Out of stock

SKU #: DEI-010220

Manufacturer Part #: 010220


Description

Design Engineering logo

An effective tool to tighten Stainless Steel Locking Ties. Saves time and hassle while providing a professional looking result. Slide the tool on the end of any 1/4″ nut driver, engage the tie and twist. Features:

  • Fits on the end of any 1/4″ drive extension
  • Works with all popular styles of stainless ties up to 1/2″ wide
  • Made from hardened tool steel
  • Black oxide coated for years of trouble-free use

Details

Manufacturer Part # 010220
GTIN 00607078102201
Weight 0.11 lbs (0.1 kg)
Height 1″ (2.5 cm)
Width 3″ (7.6 cm)
Length 5″ (12.7 cm)

Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].