The redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. In order to achieve a flatter flow curve, Deatschwerks uses a dual zone approach which increases flow where specifically engineered for high pressure, and limits flow at low pressure, thus achieving excellent performance and reliability. The DW400 has a 36mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-1009 install kit designed for:

• 09-15 Nissan GT-R

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

Floor & Tunnel Shield IIâ„¢ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8″ composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation – aluminum side must face the heat source. At only 3/16″ thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

Features :

• 10 mil dimpled aluminum face
• Protection for engine compartments
• Protection for painted body parts
• Comfortable interior at any temperature
• Hi-temp adhesive for a “do-it-once” install
• Extreme heat barrier – aluminum side should face the heat
• Only 3/16″ thick
• Use as barrier to reflect and insulate from any heat source
• Great for exterior applications

This sheet is 21 in x 48 in, approximately 7 square feet.

Floor & Tunnel Shield IIâ„¢ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8″ composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation – aluminum side must face the heat source. At only 3/16″ thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

Features :

• 10 mil dimpled aluminum face
• Protection for engine compartments
• Protection for painted body parts
• Comfortable interior at any temperature
• Hi-temp adhesive for a “do-it-once” install
• Extreme heat barrier – aluminum side should face the heat
• Only 3/16″ thick
• Use as barrier to reflect and insulate from any heat source
• Great for exterior applications

This sheet is 10 in x 10 in, approximately 1 square foot.

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

The redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. he redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. In order to achieve a flatter flow curve, Deatschwerks uses a dual zone approach which increases flow where specifically engineered for high pressure, and limits flow at low pressure, thus achieving excellent performance and reliability. The DW400 has a 36mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.