Floor & Tunnel Shield IIâ„¢ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8″ composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation – aluminum side must face the heat source. At only 3/16″ thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

Features :

• 10 mil dimpled aluminum face
• Protection for engine compartments
• Protection for painted body parts
• Comfortable interior at any temperature
• Hi-temp adhesive for a “do-it-once” install
• Extreme heat barrier – aluminum side should face the heat
• Only 3/16″ thick
• Use as barrier to reflect and insulate from any heat source
• Great for exterior applications

This sheet is 10 in x 10 in, approximately 1 square foot.

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series™ is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5″” x 10 Â’ft, 20 ft or 30 ftÂ’ rolls.

Direct Heat Resistance: 400°F

Radiant Heat Resistance: 2000°F

Features:

• 1.5″ width useful for tight bends and high impact spots
• EXO series designed with off-road in mind
• stainless steel design locks together when wrapped over itself for easy installation

A straightforward installation process coupled with an affordable price point has made Deatschwerks’ DW200 series fuel pumps a popular choice for high performance applications in need of a standard fitting pump. The DW200 series features the essential elements of a reliable fuel pump, but without the excess, making them the definitive no frills fuel pump. DW200 series fuel pumps flow 255lph at 40psi. The DW200 has a 39mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Made in Germany in collaboration with Bosch, this fuel pump is capable of supplying 1000HP gas engines with 415 lph at 40 psi. It can also do 350 lph at 80 psi and 750HP on E85, making it a very versatile pump. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 “e85”, at pressures between 70 and 100 psi.

The DW400 has a 46mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-7010 install kit is designed for:

• 99-04 Chevrolet Silverado 1500
• 99-04 Chevrolet Silverado 2500
• 01-04 Chevrolet Silverado 3500
• 99-04 GMC Sierra 1500
• 99-04 GMC Sierra 2500
• 01-04 GMC Sierra 3500

Made in Germany in collaboration with Bosch, this fuel pump is capable of supplying 1000HP gas engines with 415 lph at 40 psi. It can also do 350 lph at 80 psi and 750HP on E85, making it a very versatile pump. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 “e85”, at pressures between 70 and 100 psi. The DW400 has a 46mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-7014 install kit is designed for:

• 14-18 Chevrolet Silverado 1500
• 14-18 GMC Sierra 15000

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Pro Cell® offered by Fuel Safe is just as versatile as it is durable. No competitor can reach the excellence and guarantee of quality goods like Fuel Safe can. Pro Cells are designed specifically for use with hydrocarbon fuels but have been successfully used by top teams running ethanol blends up to and including E85. The Fuel Safe Pro Cell is the fuel cell of choice for top off road, road race and circle track racers around the globe. Pro Cell also has the ability to be create a seamless bladder design to any custom fuel cell.

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• 6 x 10 aluminum fill plate with a provision for a sending unit.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Collector system with three poly trap doors (upgrades available, or swap for surge tank)
• Limited 5 year manufacturer warranty

Configuration for any cell variation is available upon request and can include – capacity, fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This Aluminum tank has an 8 Gallon capacity.