MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Tesla Model 3 – MSS part # 02aTESM3SN

The versatile GTX3 Carbon, used extensively on race tracks across North America provides industry-leading performance and is a perfect choice for racers competing in open wheel forms of motorsports including formula, karting and dirt-track forms of racing. Featuring an ultra-lightweight carbon shell, integrated rear wing for enhanced aerodynamic performance at higher speeds, venturi air-exchange system, and double screen anti fog (DSAF) shield, the GTX3 Carbon is ideal for dirt track and other challenging forms of racing.

Features:

The AR-10 III is the ideal helmet for all types of racing. From the dusty ovals of Tennessee to the starting line at Pomona, its comfortable Fire Resistant Moisture-wicking Comfort-Carbon interior and Advanced Ventilation System keeps you cool and comfortable. The AR-10 III is the affordable alternative and is very popular not only as an introductory helmet, but also for someone looking for a long lasting, highly functional helmet that doesn’t break the bank.

Features include:

• Advanced Fiberglass Composite Weave Shell: Lightweight Superior fit and comfort using advanced CAD technology
• “ACS” Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out
• Optional Shields Available in Amber, Dark Smoke, Dark Blue, and Black Chrome
• Optional Clear Spoiler is available
• Polycarbonate Anti-fog Shield with Tear-off Posts
• Pre-installed M6 terminal for head and neck restraints
• Improved Front Ventilation
• Double D-ring retention system

The helmet is SNELL SA2015 approved. This is the white size XXL version.

Size Chart

The versatile GTX3 Carbon, used extensively on race tracks across North America provides industry-leading performance and is a perfect choice for racers competing in open wheel forms of motorsports including formula, karting and dirt-track forms of racing. Featuring an ultra-lightweight carbon shell, integrated rear wing for enhanced aerodynamic performance at higher speeds, venturi air-exchange system, and double screen anti fog (DSAF) shield, the GTX3 Carbon is ideal for dirt track and other challenging forms of racing.

Features:

The M.8 Carbon is the next evolution in Bell’s legendary M series design concept incorporating traditional styling, enhanced visibility and versatile features allowing the helmet to be used in all forms of racing. The M.8 Carbon provides outstanding comfort and features including a lightweight composite shell, Comfort-Plus interior, superior ventilation with manual lever air intake vents and a large eye opening. The M.8 Carbon is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance. This is the helmet in size 2x extra large (XXL).

Features

• All-Purpose, Versatile Helmet
• Traditional Bell Styling
• Ultralightweight Carbon Fiber Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Large Size Eye port
• SRV-8 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Sizes XXS (54-55) to 4XL (67-68) – Largest Size Range of Any Bell Model
• Available in White or Matte Black
• Snell SA2020 Homologation
• FIA8859-2015 Homologation

Size chart

The GTX3 features a lightweight carbon composite shell and sleek aero styling for enhanced performance at higher speeds. The GTX3’s integrated double screen anti-fog (DSAF) shield and rear-facing vents allow air exchange and clear vision while preventing dust and dirt from entering the helmet, making it an ideal choice for racers competing in dirt-track forms of racing in addition to open wheel, formula and karting.

Features:

The M.8 Carbon is the next evolution in Bell’s legendary M series design concept incorporating traditional styling, enhanced visibility and versatile features allowing the helmet to be used in all forms of racing. The M.8 Carbon provides outstanding comfort and features including a lightweight composite shell, Comfort-Plus interior, superior ventilation with manual lever air intake vents and a large eye opening. The M.8 Carbon is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance.

Features

• All-Purpose, Versatile Helmet
• Traditional Bell Styling
• Ultralightweight Carbon Fiber Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Large Size Eye port
• SRV-8 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Sizes XXS (54-55) to 4XL (67-68) – Largest Size Range of Any Bell Model
• Available in White or Matte Black
• Snell SA2015 Homologation
• FIA8859-2015 Homologation

Size chart

All SA2015 helmet sales are final sale with no returns.

The M.8 Carbon is the next evolution in Bell’s legendary M series design concept incorporating traditional styling, enhanced visibility and versatile features allowing the helmet to be used in all forms of racing. The M.8 Carbon provides outstanding comfort and features including a lightweight composite shell, Comfort-Plus interior, superior ventilation with manual lever air intake vents and a large eye opening. The M.8 Carbon is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance.

Features

• All-Purpose, Versatile Helmet
• Traditional Bell Styling
• Ultralightweight Carbon Fiber Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Large Size Eye port
• SRV-8 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Sizes XXS (54-55) to 4XL (67-68) – Largest Size Range of Any Bell Model
• Available in White or Matte Black
• Snell SA2015 Homologation
• FIA8859-2015 Homologation

Size chart

The K1 Sport is a race-ready, multi-use, full-feature helmet with superior ventilation combined with modern styling built for the entry-level racer who demands quality at an affordable price. Incorporating a lightweight composite shell, excellent fit, and multiple ventilation options, the all-purpose K1 Sport is a perfect choice for racers on a budget or auto enthusiasts just entering the sport.

Features

• Lightweight composite shell
• Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
• Versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake vents that can be opened and closed
• Superior ventilation with direct flow chin bar vents, forehead vents, and top vents
• Air Intake, rear spoiler, top gurney, and chin bar gurneys available separately
• Forced air attachments available separately for use with external cooling systems
• M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
• Shield and pivot kit: 287 SRV, SRV-1
• Colors: White, Metallic Black, Safety Orange, Titanium Silver
• Sizes: XXS, XS, S, M, L, XL

Size chart

The H10 is the ideal helmet for all types of racing. From the dusty ovals of Tennessee to the starting line at Pomona, its comfortable Fire Resistant Moisture-wicking Comfort-Carbon interior and Advanced Ventilation System keeps you cool and comfortable. The H10 is the affordable alternative and is very popular not only as an introductory helmet, but also for someone looking for a long lasting, highly functional helmet that doesn’t break the bank. Features include:

• Advanced Fiberglass Composite Weave Shell: Lightweight Superior fit and comfort using advanced CAD technology
• “ACS” Advanced Channeling Ventilation System: Full front to back airflow flushes heat and humidity up and out
• Optional Shields Available in Amber, Dark Smoke, Dark Blue, and Black Chrome
• Optional Clear Spoiler is available
• Polycarbonate Anti-fog Shield with Tear-off Posts
• Pre-installed M6 terminal for head and neck restraints
• Improved Front Ventilation
• Double D-ring retention system

The helmet is SNELL SA2015 approved. Available in white or black and sizes XS-XXL.

Size Chart