MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition.

The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience.

Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car.
When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position.

The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation.

The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions.

The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking.

This kit fits:

• BMW 1-Series F20 Hatchback 5-door – MSS part # 02aBMW1F20HB Please contact us before installing
• BMW 1-Series F21 Hatchback 3-door – MSS part # 02aBMW1F21HB Please contact us before installing
• BMW 2-Series F22 Coupe – MSS part # 02aBMW2F22CP Please contact us before installing
• BMW 2-Series F23 Cabriolet – MSS part # 02aBMW2F23CB Please contact us before installing
• BMW M2/Competition F87 Coupe – MSS part # 02aBMW2F87CP
• BMW 3-Series F30 Sedan – MSS part # 02aBMW3F30SN Please contact us before installing
• BMW M3 F80 Sedan – MSS part #02aBMW3F80SN
• BMW 4-Series F32 Coupe – MSS part # 02aBMW4F32CP Please contact us before installing
• BMW 4-Series F33 Cabriolet – MSS part # 02aBMW4F33CB Please contact us before installing
• BMW 4-Series F36 Gran Coupe – MSS part # 02aBMW4F36GC Please contact us before installing
• BMW 4-Series F82 Coupe – MSS part # 02aBMW4F82CP Please contact us before installing
• BMW 4-Series F83 Cabriolet – MSS part # 02aBMW4F83CB Please contact us before installing
• BMW M4

We ship worldwide MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Audi TT MK2 Coupe(8J 2006 – 2014) MSS part #02aAUDTT8JCP
• Audi TT-S MK2 Coupe (8J 2006 – 2014) MSS part # 02aAUDS8JCP
• Audi TT VR6 MK2 Coupe (8J 2006 – 2014) MSS part #02aAUDVR6CP
• Audi TT-RS MK2 Coupe (8J 2006 – 2014) MSS part #02aAUDRS8JCP
• Audi TT MK2 Roadster (8J 2006 – 2014) MSS part #02aAUDS8JRD
• Audi TT-S MK2 Roadster (8J 2006 – 2014) MSS part #02aAUDS8JRD
• Audi TT VR6 MK2 Roadster (8J 2006 – 2014) MSS part #02aAUDVR6RD
• Audi TT-RS MK2 Roadster(8J 2006 – 2014) MSS part #02aAUDRS8JRD
• Volkswagen MK5 R32 only (2003 – 2009) MSS part #02aVWG5R32HB
• Volkswagen MK6 GTI (2009 – 2014) MSS part #02aVWG6GTIHB
• Volkswagen MK6 TDI (2009 – 2014) MSS part #02aVWG6TDIHB

We ship worldwide MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Audi Q5 2017+ – MSS part # 05aAUDQ5SU
• Audi SQ5 2017+ – MSS part # 05aAUDSQ5SU

MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Volkswagen Tiguan
• Volkswagen Tiguan R
• Audi Q3 Gen 2
• Audi SQ3 Gen 2
• Audi RSQ3 Gen 2

We ship worldwide
MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition.

The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience.

Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car.
When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position.

The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation.

The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions.

The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking.

This kit fits:

• Audi A4 Sedan (B9 2012+) MSS part #02aAUDA4B9SN
• Audi A4 Wagon (B9 2012+) MSS part # 02aAUDA4B9ES
• Audi S4 Sedan (B9 2012+) MSS part # 02aAUDS4B9ES
• Audi S4 Wagon (B9 2012+) MSS part # 02aAUDS4B9SN
• Audi RS4 Sedan (B9 2012+) MSS part # 02aAUDRS4SN
• Audi RS4 Wagon (B9 2012+) MSS part # 02aAUDRS4ES
• Audi A5 Coupe (B9 2012+) MSS part # 02aAUDA5B9CP
• Audi A5 Sportback (B9 2012+) MSS part # 02aAUDA5B9SP
• Audi A5 Cabriolet (B9 2012+) MSS part # 02aAUDA5B9CB
• Audi S5 Coupe (B9 2012+) MSS part # 02aAUDS5B9CP
• Audi S5 Sportback (B9 2012+) MSS part # 02aAUDS5B9SB
• Audi S5 Cabriolet (B9 2012+) MSS part # 02aAUDS5B9CB
• Audi RS5 Coupe (B9 2012+) MSS part # 02aAUDRS59CP
• Audi RS5 Sportback (B9 2012+) MSS part # 02aAUDRS59SB

We ship worldwide MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Audi A3 Sedan (8V 2012+) MSS part # 03aAUDA38VSN
• Audi A3 Sportback (8V 2012+) MSS part # 03aAUDA38VSB
• Audi A3 Cabriolet (8V 2012+) MSS part # 03aAUDA38VCB
• Audi S3 Sedan (8V 2012+) MSS part # 03aAUDS38VSN
• Audi S3 Sportback (8V 2012+) MSS part # 03aAUDS38VSB
• Audi S3 Cabriolet (8V 2012+) MSS part # 03aAUDS38VCB
• Audi RS3 Sedan (8V 2012+) MSS part # 03aAUDRS8VSN
• Audi RS3 Sportback (8V 2012+) MSS part # 03aAUDRS8VSB
• Audi RS3 Cabriolet (8V 2012+) MSS part # 03aAUDRS8VCB

We ship worldwide
MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition.

The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience.

Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car.
When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position.

The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation.

The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions.

The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking.

This kit fits:

• Audi A3 Sedan (8V 2012+) MSS part # 02aAUDA38VSN
• Audi A3 Sportback (8V 2012+) MSS part # 02aAUDA38VSB
• Audi A3 Cabriolet (8V 2012+) MSS part # 02aAUDA38VCB
• Audi S3 Sedan (8V 2012+) MSS part # 02aAUDS38VSN
• Audi S3 Sportback (8V 2012+) MSS part # 02aAUDS38VSB
• Audi S3 Cabriolet (8V 2012+) MSS part # 02aAUDS38VCB
• Audi RS3 Sedan (8V 2012+) MSS part # 02aAUDRS8VSN
• Audi RS3 Sportback (8V 2012+) MSS part # 02aAUDRS8VSB
• Audi RS3 Cabriolet (8V 2012+) MSS part # 02aAUDRS8VCB

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Gun Metal Silver 14 x 1.25 version.

Please check for your vehicle below to ensure fitment :

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Gun Metal Silver 12 X 1.5 version.

Please check for your vehicle below to ensure fitment :

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Black 14 X 1.25 version.

Please check for your vehicle below to ensure fitment :