Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

Available in Black or Gun Metal Silver.

Please check for your vehicle below to ensure fitment :

Bringing MOMO’s past into the present, the MOMO Heritage 6 wheel features a modernized classic six-spoke design that is reminiscent of MOMO’s first light alloy wheels that revolutionized the industry in the 1970’s. Today’s MOMO six-spoke wheel is made using revolutionary rotary forged flow forming technology, a manufacturing process that makes wheels both light and strong. Through a unique combination of heat, pressure and rotation, the dual-way flow forming process creates a rim area with similar strength and impact ratings to forged wheels with a 15% weight reduction over alloy wheels.

Heritage 6 wheels are custom made to order. They all feature a 5/100-130 bolt pattern. This is the 17 x 9.5 size with 35 mm lip and it is available in 0 – 41 mm offset. Please email us after ordering with the offset you want.

For reference, here is the full list of available sizes of the MOMO Heritage 6 wheel:

Bringing MOMO’s past into the present, the MOMO Heritage 6 wheel features a modernized classic six-spoke design that is reminiscent of MOMO’s first light alloy wheels that revolutionized the industry in the 1970’s. Today’s MOMO six-spoke wheel is made using revolutionary rotary forged flow forming technology, a manufacturing process that makes wheels both light and strong. Through a unique combination of heat, pressure and rotation, the dual-way flow forming process creates a rim area with similar strength and impact ratings to forged wheels with a 15% weight reduction over alloy wheels.

Heritage 6 wheels are custom made to order. They all feature a 5/100-130 bolt pattern. This is the 17 x 9 size with 15 mm lip and it is available in 11 – 54 mm offset. Please email us after ordering with the offset you want.

For reference, here is the full list of available sizes of the MOMO Heritage 6 wheel:

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Black 14 X 1.25 version.

Please check for your vehicle below to ensure fitment :

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Gun Metal Silver 12 X 1.5 version.

Please check for your vehicle below to ensure fitment :

We ship worldwide
MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition.

The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience.

Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car.
When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position.

The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation.

The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions.

The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking.

This kit fits:

• Audi A4 Sedan (B9 2012+) MSS part #02aAUDA4B9SN
• Audi A4 Wagon (B9 2012+) MSS part # 02aAUDA4B9ES
• Audi S4 Sedan (B9 2012+) MSS part # 02aAUDS4B9ES
• Audi S4 Wagon (B9 2012+) MSS part # 02aAUDS4B9SN
• Audi RS4 Sedan (B9 2012+) MSS part # 02aAUDRS4SN
• Audi RS4 Wagon (B9 2012+) MSS part # 02aAUDRS4ES
• Audi A5 Coupe (B9 2012+) MSS part # 02aAUDA5B9CP
• Audi A5 Sportback (B9 2012+) MSS part # 02aAUDA5B9SP
• Audi A5 Cabriolet (B9 2012+) MSS part # 02aAUDA5B9CB
• Audi S5 Coupe (B9 2012+) MSS part # 02aAUDS5B9CP
• Audi S5 Sportback (B9 2012+) MSS part # 02aAUDS5B9SB
• Audi S5 Cabriolet (B9 2012+) MSS part # 02aAUDS5B9CB
• Audi RS5 Coupe (B9 2012+) MSS part # 02aAUDRS59CP
• Audi RS5 Sportback (B9 2012+) MSS part # 02aAUDRS59SB

Bringing MOMO’s past into the present, the MOMO Heritage 6 wheel features a modernized classic six-spoke design that is reminiscent of MOMO’s first light alloy wheels that revolutionized the industry in the 1970’s. Today’s MOMO six-spoke wheel is made using revolutionary rotary forged flow forming technology, a manufacturing process that makes wheels both light and strong. Through a unique combination of heat, pressure and rotation, the dual-way flow forming process creates a rim area with similar strength and impact ratings to forged wheels with a 15% weight reduction over alloy wheels.

Heritage 6 wheels are custom made to order. They all feature a 5/100-130 bolt pattern. This is the 17 x 8 size with 15 mm lip and it is available in 0 – 42 mm offset. Please email us after ordering with the offset you want.

For reference, here is the full list of available sizes of the MOMO Heritage 6 wheel:

MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Volkswagen Tiguan
• Volkswagen Tiguan R
• Audi Q3 Gen 2
• Audi SQ3 Gen 2
• Audi RSQ3 Gen 2

The MOMO Daytona is a is Hans© compatible seat with MOMO’s revolutionary quick-drying Airnet© material covering the seat’s back insert. Airnet© is the new technical material with incredible transpiration and strength characteristics. With Airnet©, the driving comfort will be excellent, thanks to greater air flow in the seat back and to the most effective moisture permeability. The front side of the Daytona racing seat is upholstered in self-extinguishing fabric with exposed fiberglass shell around the back of the seat. Kinder Point on DAYTONA’s seating area keeps the driver firmly in place. Removable double leg cushions enhance support. The MOMO Daytona racing seat’s side head bolsters protect the driver’s head by reducing lateral movement.

Lightweight (0.8KG lighter than stock) and extremely rigid high downforce Carbon Fibre (straight) rear wing designed by aerodynamics writer and designer Simon McBeath that fits the Lotus Exige S2 (04 – 06). Rear wing wing gives approximately 63% more down force than stock wing (493N of down force vs. 300N stock, 100mph at 12 deg AoA).

The rear wing kit is specially designed by Reverie to fit the Lotus Exige S2(04-06) providing increased downforce and performance.

Can be adjustably mounted for desired angle of attack. We also provide a fitting service, please contact us first for more information. Shipping available worldwide.

Available in a Lacquered or a plain finish.

Please note the following disclaimer provided by Reverie and which applies to all Reverie products: