BSCI pioneered the innovation and development of roll bar padding that set the industry standard. Both the half round shape and SFI safety standards resulted from lobbying and research and development initiated by BSCI. Today, we are still the leader in development of energy management foams for use in protecting drivers and occupants from more serious injuries when interior roll cages are contacted. BSCI SFI padding is used extensively throughout the USA and in global motorsports venues. Always turn to BSCI for the best in roll bar padding products.

• Tested extensively under rigorous impact and flammability standards
• Available in colors Black, Red and Blue
• Formulated for maximum impact absorption using our superior technology
• Will not melt or drip in a fire and the padding is self-extinguishing
• Acrylic adhesive molded within padding for easy installation
• Easy to cut and shape for custom installation

Features:

• 3/4″ thickness to fit 1 and 1/4″ – 1 and 3/8″ bar diameter
• Padding is 36″ in length

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Gun Metal Silver 14 x 1.25 version.

Please check for your vehicle below to ensure fitment :

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove the wheel lug nuts one at a time in a star pattern, and then replacing them with the locking nuts before removing the next lug nut to continue. Then the wheel is torqued to the appropriate torque setting. Check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
20 x Locking Nuts – 12 X 1.5 thread
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• 60 degree conical seat

This is the Silver version.

Please check for your vehicle below to ensure fitment :

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

Available in Black or Gun Metal Silver.

Please check for your vehicle below to ensure fitment :

A straightforward installation process coupled with an affordable price point has made Deatschwerks’ DW200 series fuel pumps a popular choice for high performance applications in need of a standard fitting pump. The DW200 series features the essential elements of a reliable fuel pump, but without the excess, making them the definitive no frills fuel pump. DW200 series fuel pumps flow 255lph at 40psi. The DW200 has a 39mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Black 12 X 1.5 version.

Please check for your vehicle below to ensure fitment :

Made in Germany in collaboration with Bosch, this fuel pump is capable of supplying 1000HP gas engines with 415 lph at 40 psi. It can also do 350 lph at 80 psi and 750HP on E85, making it a very versatile pump. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 “e85”, at pressures between 70 and 100 psi. The DW400 has a 46mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-1045 install kit is designed for:

• 05-10 Ford Mustang (excluding GT500)

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Gun Metal Silver 12 X 1.5 version.

Please check for your vehicle below to ensure fitment :

Ensure safety and prevent theft with a set of Wheel Lock Lugnuts, that can only be removed using the provided key. Each Lugnut is cut with a special pattern that is matched to a tool key for removal and installation.

Installation requires you remove one wheel nut and replace it with one of the locking nuts, and then to torque the wheel to the appropriate torque setting. Then, to check the torque for the first 20 – 100 miles, and to re-torque as required to 85-88 ft lbs.

Each set comes with :
5 x Locking Nuts – 12 X 1.5 or 14 X 1.25 thread (CHECK VEHICLE FITMENT BELOW)
1 x Key for removal and installation

Key Features:

• Added security for wheels
• Individualized locking pattern
• Manufactured from Forged Alloy Steel
• Open ended for full racing stud engagement
• 20 mm Diameter, perfect for smaller bored lug holes
• Compatible with 44 – 90 mm length studs
• 60 degree conical seat

This is the Black 14 X 1.25 version.

Please check for your vehicle below to ensure fitment :

The Arai GP-J3 is another representation of Arai’s pursuit of comfort and function in one attractive package whose simplicity and smooth lines belie the complex energy-management system within. The updated and improved shell shape and construction incorporate extended facial coverage with sculpted “FCS” cheek pads for improved support and comfort. The same care and attention that Arai puts into every helmet can be found in the details of the GP-J3 open-face series. The interior fit is typical Arai, benefiting from over 50 years of research and refinement, and resulting in a helmet that more closely matches the shape of the human head. The fit is close but remarkably comfortable, allowing for the smallest possible helmet to be worn for maximum protection. Meets Snell SA2020 & FIA 8859-2015 standards. This is the black L version.

Adjustable Peak GP-J3 has an adjustable peak that combines the adjustability of the previous Jet/f with the classic rounded styling of a more traditional vintage design. The peak also includes easily-removable/replaceable light tint anti-glare lens.

Cheek Pads and the Comfort Head Liner Removable and replaceable with optional pads of various thicknesses for a more custom fit, as well as allowing for more frequent, and more thorough, cleaning when needed.

Ventialtion The GP-J3 has four top vents, giving the Jet series its first-ever ventilation system.

M6 Anchor Type Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.

Low Center of Gravity Combined with its legendary comfort and fit, Arai concentrates on balance and a lower center of gravity. All too often, people concentrate more on the weight of a helmet instead of how that weight is distributed over the entire helmet. A lower center of gravity causes less fatigue and feels lighter on the wearers head over a full track session.

Size Guide