CSF manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF to stay ahead of the pack when it comes to radiator technology!

“B-Tube” technology – Unlike a regular oval shape “O” type radiator tube, CSF uses a specially engineered tube in a shape of a “B”. These “B-tubes” are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal “O” shape tubes that are welded.

The design (inlet in the middle of tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes. You get the efficiency of 2 smaller tubes vs. 1 large tube within the same space criteria. With “B-tubes” you are able to get “dual liquid laminar flow.”

High Efficiency Multi Louvered Fin – CSF uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.

Each CSF high quality radiator is completed with an industry leading 1 hour, hand polished “Show-Stopper™ mirror finish.” Our hand polishing tools and techniques in our new polishing center located at the end of the production line ensures that every CSF cooling system looks just as good as it performs.

Features:

• CAD/CAM designed using Unigraphics™ Software
• OE radial and deep drawn aluminum endtanks
• “B-Tube” Technology – Stronger, most efficient tube in the world
• Wind tunnel tested for optimal radiator core cooling efficiency
• “Racing Style” Aluminum Drain Plug
• Brazed in CAB Furnace
• ISO 9001/9002 certification
• Military Grade (special clad) aluminum used for tubes, fins, header, plates, and side brackets (JIS 3003 spec minimum)
• CNC machined fittings
• “Master Class” TIG welding

Course Motorsports’s Steering Wheel Quick Release was engineered with a race track’s harsh environment in mind. Unlike most other quick disconnects on the market, this unit features a unique tapered socket that eliminates movement, drastically extending the product’s effective lifetime. CNC machined from 7075 aluminum, superior in strength to the 6061 and 5052 aluminum typically used in other quick disconnects, Course Motorsports’s Steering Wheel Quick Release will outperform and outlast the competition. This product uses the standard 6x70mm (2.75″) bolt pattern found on most aftermarket steering wheels. Anodized in a variety of color options and shipped with all hardware necessary for installation, just add an adapter hub for your application and you’re all set!

The Cartek Motorsport GT Battery Isolator is a very small and highly reliable alternative to the traditional mechanical master-switch. The unit has been designed to overcome all of the problems and restrictions associated with mechanical and electro/mechanical safety cut-outs. When fitted to a race car this solid state battery isolator simultaneously isolates the battery and kills the engine immediately when triggered in accordance with FIA safety regulations.

This system has been designed to simplify installation thereby saving time and reducing build costs.

Features

• Fully electronic with no moving parts
• Totally sealed against water and dirt
• Completely resistant to shock and vibration
• 0.5 second delay between transmitting the engine kill signal and disconnecting the battery allowing ECUs time to perform a shutdown sequence before electrical power is lost.
• Fully integrated with built in alternator run-down circuitry – No extra components required
• Driver operation by a single internal ON-OFF button/switch
• External operation by single or multiple ‘strike’ button(s)
• Buttons / switches connected to Isolator using light weight wiring
• Mounts close to battery for reduced cabling
• Very small and weighs just 70g
• Designed and manufactured in UK using high quality components

How it Works
The Cartek Battery Isolator GT provides two functions. The first is to disconnect the Battery from all Electrical Circuits. The second is to kill the engine.

Battery Isolation
Battery Isolators work by being fitted in between the negative side of the battery and the chassis. When the external kill button has been activated or the internal button been switched to the off state, then the Battery Isolator will disconnect the negative side of the battery from the Chassis. This means that no power can get to any of the electrical circuits as there is a break in the circuit.

Engine Kill
This unit does not have a power input or power output. Instead it sends a signal (12v 0.2a when on, switched to chassis/earth when off) which is wired up to either a Power Distribution Module or Motorsport ECU that has an ignition switch signal input. The ECU or Power Distribution Module will then shut down when it see’s this signal – which then kills the engine.

Built in Protection
The Cartek Battery Isolator XR comes with built in alternator run down protection meaning no extra wiring and no extra components.

How Is It Controlled?
The two electronic isolation circuits are controlled by microprocessors and incorporate various safety systems including over-temperature and over-current monitoring. These microprocessors also monitor the kill switches/buttons for instant activation without false triggering.

Kit Contents:

• Battery isolator XR
• 1 x 2M cable
• 1 x Internal button
• 1 x External button
• 1 x Safety stickers pack

Specifications

BSCI pioneered the innovation and development of roll bar padding that set the industry standard. Both the half round shape and SFI safety standards resulted from lobbying and research and development initiated by BSCI. Today, we are still the leader in development of energy management foams for use in protecting drivers and occupants from more serious injuries when interior roll cages are contacted. BSCI SFI padding is used extensively throughout the USA and in global motorsports venues. Always turn to BSCI for the best in roll bar padding products.

• Tested extensively under rigorous impact and flammability standards
• Available in colors Black, Red and Blue
• Formulated for maximum impact absorption using our superior technology
• Will not melt or drip in a fire and the padding is self-extinguishing
• Acrylic adhesive molded within padding for easy installation
• Easy to cut and shape for custom installation

Features:

• 3/4″ thickness to fit 1 and 1/4″ – 1 and 3/8″ bar diameter
• Padding is 36″ in length

BSCI pioneered the innovation and development of roll bar padding that set the industry standard. Both the half round shape and SFI safety standards resulted from lobbying and research and development initiated by BSCI. Today, we are still the leader in development of energy management foams for use in protecting drivers and occupants from more serious injuries when interior roll cages are contacted. BSCI SFI padding is used extensively throughout the USA and in global motorsports venues. Always turn to BSCI for the best in roll bar padding products.

Tested extensively under rigorous impact and flammability standards
Available in colors Black, Red and Blue
Formulated for maximum impact absorption using our superior technology
Will not melt or drip in a fire and the padding is self-extinguishing
Acrylic adhesive molded within padding for easy installation
Easy to cut and shape for custom installation

Features:

• 3/4″ thickness to fit 1 & 3/4″ – 2″ bar diameter
• Padding is 36″ in length

BSCI pioneered the innovation and development of roll bar padding that set the industry standard. Both the half round shape and SFI safety standards resulted from lobbying and research and development initiated by BSCI. Today, we are still the leader in development of energy management foams for use in protecting drivers and occupants from more serious injuries when interior roll cages are contacted. BSCI SFI padding is used extensively throughout the USA and in global motorsports venues. Always turn to BSCI for the best in roll bar padding products.

• Tested extensively under rigorous impact and flammability standards
• Available in colors Black, Red and Blue
• Formulated for maximum impact absorption using our superior technology
• Will not melt or drip in a fire and the padding is self-extinguishing
• Acrylic adhesive molded within padding for easy installation
• Easy to cut and shape for custom installation

Features:

• 3/4″ thickness to fit 1 & 1/8″- 1 & 3/8″ bar diameter
• Padding is 36″ in length

BSCI is offering an innovation for occupant protection in vehicles outfitted with a roll cage. Our dual durometer padding takes SFI 45.1 roll bar padding a step further combining a soft texture with a SFI 45.1 approved core material. We have listened to customers and developed a product that is especially advantageous to the street driven race car as well as for those racers who prefer the soft touch characteristics when it comes to padding but also want to provide themselves with the protection only BSCI 45.1 approved padding can provide.

The dual durometer padding is constructed in two pieces. The outer surface is very durable, soft touch foam and the inner padding is SFI 45.1 approved. With this combination, lower speed impacts feel much softer than with just the SFI approved padding but when higher speed impacts occur, the SFI 45.1 approved core reduces the chances of serious injuries. Best of all, it will meet all sanctioning body requirements where SFI 45.1 approved padding is mandated.

The manufacturing process is done so that the outer soft padding can be removed when needed. This padding is especially good in high traffic areas where normal padding starts to deteriorate due to contact with the body. Locations such as door bars or anywhere that parts of the body are in constant contact with the roll cage is where the dual durometer padding is best utilized.

BSCI is offering an innovation for occupant protection in vehicles outfitted with a roll cage. Our dual durometer padding takes SFI 45.1 roll bar padding a step further combining a soft texture with a SFI 45.1 approved core material. We have listened to customers and developed a product that is especially advantageous to the street driven race car as well as for those racers who prefer the soft touch characteristics when it comes to padding but also want to provide themselves with the protection only BSCI 45.1 approved padding can provide.

The dual durometer padding is constructed in two pieces. The outer surface is very durable, soft touch foam and the inner padding is SFI 45.1 approved. With this combination, lower speed impacts feel much softer than with just the SFI approved padding but when higher speed impacts occur, the SFI 45.1 approved core reduces the chances of serious injuries. Best of all, it will meet all sanctioning body requirements where SFI 45.1 approved padding is mandated.

The manufacturing process is done so that the outer soft padding can be removed when needed. This padding is especially good in high traffic areas where normal padding starts to deteriorate due to contact with the body. Locations such as door bars or anywhere that parts of the body are in constant contact with the roll cage is where the dual durometer padding is best utilized.

This is the 5/8″ – 7/8″ sized version.

BSCI is offering an innovation for occupant protection in vehicles outfitted with a roll cage. Our dual durometer padding takes SFI 45.1 roll bar padding a step further combining a soft texture with a SFI 45.1 approved core material. We have listened to customers and developed a product that is especially advantageous to the street driven race car as well as for those racers who prefer the soft touch characteristics when it comes to padding but also want to provide themselves with the protection only BSCI 45.1 approved padding can provide. The dual durometer padding is constructed in two pieces. The outer surface is very durable, soft touch foam and the inner padding is SFI 45.1 approved. With this combination, lower speed impacts feel much softer than with just the SFI approved padding but when higher speed impacts occur, the SFI 45.1 approved core reduces the chances of serious injuries. Best of all, it will meet all sanctioning body requirements where SFI 45.1 approved padding is mandated. The manufacturing process is done so that the outer soft padding can be removed when needed. This padding is especially good in high traffic areas where normal padding starts to deteriorate due to contact with the body. Locations such as door bars or anywhere that parts of the body are in constant contact with the roll cage is where the dual durometer padding is best utilized. This is the 1 1/4″ – 1 3/8″ sized version.

BSCI is offering an innovation for occupant protection in vehicles outfitted with a roll cage. Our dual durometer padding takes SFI 45.1 roll bar padding a step further combining a soft texture with a SFI 45.1 approved core material. We have listened to customers and developed a product that is especially advantageous to the street driven race car as well as for those racers who prefer the soft touch characteristics when it comes to padding but also want to provide themselves with the protection only BSCI 45.1 approved padding can provide.

The dual durometer padding is constructed in two pieces. The outer surface is very durable, soft touch foam and the inner padding is SFI 45.1 approved. With this combination, lower speed impacts feel much softer than with just the SFI approved padding but when higher speed impacts occur, the SFI 45.1 approved core reduces the chances of serious injuries. Best of all, it will meet all sanctioning body requirements where SFI 45.1 approved padding is mandated.

The manufacturing process is done so that the outer soft padding can be removed when needed. This padding is especially good in high traffic areas where normal padding starts to deteriorate due to contact with the body. Locations such as door bars or anywhere that parts of the body are in constant contact with the roll cage is where the dual durometer padding is best utilized.

This is the 1 1/2″ – 2″ sized version.