Developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system and the performance features of the HP7 to create the most advanced, lightweight SA rated helmet that can be used in North America’s most demanding forms of racing. Penske Racing challenged Bell’s engineering team to develop a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, used with or without ear cups in an ultra-lightweight configuration, delivered race-ready under 2.75 pounds. Always up to the challenge, Bell delivered with the innovative RS7C LTWT.

This is the 58 cm (7 1/4) size version.

Features:

• Aerospace grade ultra-lightweight carbon shell
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Multi-purpose fit system that can be used with or without ear cups (ear cups included)
• Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
• Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
• Interior ventilation channels enhanced to maximize airflow
• Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
• Integrated channels in face piece offer multiple options to install drink tube and radio systems
• Available in two versions: standard RS7C LTWT and RS7SC LTWT (non-ventilated)
• Top spoiler, top and chin bar gurneys available separately
• Top air attachments available separately
• Factory installed Hans anchors as original equipment
• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
• Shield and pivot kit: SE07, SV(SE07)
• Homologation: Snell SA2015
• Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
• Color: Carbon Matte Clear

Developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system and the performance features of the HP7 to create the most advanced, lightweight SA rated helmet that can be used in North America’s most demanding forms of racing. Penske Racing challenged Bell’s engineering team to develop a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, used with or without ear cups in an ultra-lightweight configuration, delivered race-ready under 2.75 pounds. Always up to the challenge, Bell delivered with the innovative RS7C LTWT.

This is the 57 cm (7 1/8″) size version.

Features:

• Aerospace grade ultra-lightweight carbon shell
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Multi-purpose fit system that can be used with or without ear cups (ear cups included)
• Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
• Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
• Interior ventilation channels enhanced to maximize airflow
• Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
• Integrated channels in face piece offer multiple options to install drink tube and radio systems
• Available in two versions: standard RS7C LTWT and RS7SC LTWT (non-ventilated)
• Top spoiler, top and chin bar gurneys available separately
• Top air attachments available separately
• Factory installed Hans anchors as original equipment
• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
• Shield and pivot kit: SE07, SV(SE07)
• Homologation: Snell SA2015
• Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
• Color: Carbon Matte Clear

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney. Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Carbon finish
• Snell SA2020 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Size 61 cm / 7 5/8 in version
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Sizes 7 1/8 minus (57-) to 7 5/8+ (61+)
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart