415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
Inner Diameter: 38mm
Wall Thickness: 4,3mm
Textile Layers: 3
Temperature Range: -40°C to 220°C
Pressure resistant up to: minimum 5bar
Color: black (completely)
SKU #: BOP-SI-CAP-38S
Manufacturer Part #: SI-CAP-38S
This BOOST Products Silicone end caps are reinforced with textile layers to be extreme pressure resistant and also to vacuum in your boost System. These caps are suitable for blanking of your intercooler or radioator pipes/tubes, intake systems, water lines or similar. Also ideal when an engine and/or auxillary parts have been removed and been standing for a long time, corrosion etc. is slowed down by closing open connections on the engine and parts. The silicone blanking caps can withstand up to 5 Bar and temperatures up to 220° C. They are not to be used to get in contact with fuel or oil!
In contrast to other suppliers, the Boost Products silicone caps are reinforced thanks to multiple fabric inserts, so they can also be loaded with pressure (air/water).
After many tests we deliver best quality at the best price! The BOOST Products silicone Products have achieved and many times even exceeded the quality of silicone items compared to ones made by well known manufacturers in quality tests. This silicone is durable and flexible, stable and color-proof after many years. Lots of well known company's in the tuning and motorsport areas rely on silicone Products made by BOOST Products. Rely on our quality!
BOOST Products silicone blanking caps have until 38mm 3 layers of fabric and 4,3mm wall thickness. They come with a small subtle BOOST Products logo which proofs the silicone hoses' quality.
- The diameter refers to the inner diameter
- when choosing the clamp take the wall thickness x2 for the right size
- silicone Products are 1-3mm elastic
- if you can't find the right size, choose the smaller one which is available
|Manufacturer Part #||SI-CAP-38S|
|Country of Manufacture||China|
|Weight||0.10 lbs (0.0 kg)|
|Height||1.25" (3.2 cm)|
|Width||1.6" (4.1 cm)|
|Length||1.6" (4.1 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.