The AEM Water/Methanol Injection System Advantage

Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.

AEM offers a few different water/methanol controller designs for gas vehicles:

• One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.
• The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor.
• The last is a Multi-Input controller and is dependent on an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.

Key Features :

• Multi-Input (0-5v/frequency) progressive controller design features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
• Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid.
• “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)
• Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable
• Precision-machined billet-aluminum injector with integral check valve
• Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
• 1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available)
• 20 feet of injection tubing included
• LED dash light for system status and low fluid warning

This is for the controller that operates depending on MAF/P Signal, comes with a 1-Gallon tank, and has a fluid level sensor.
This kit can also be used on NA vehicles

Note from AEM : For optimum results, all Water/Methanol Injection Systems and gauges should be run with an AEM inline filter (AEM part # 30-3003)

A favorite for sedan and stock car racers, the GP-5W offers a wider eyeport and lightweight construction making for a durable and versatile helmet. Head and Neck Restraint devices with the standard 6mm helmet bolt can be easily added with the new M6 washer nut installed at the factory. The helmet is SA2015 certified. This is the white XL version. ScLc Construction It’s constructed of Arai’s exclusive, very-lightweight ScLc shell technology (Super Complex Laminate Construction), so it maintains a low overall weight to offset the added weight of the larger shield. Shell Shape It has a smaller, more “natural” head shape, and a lower center of gravity to balance and stabilize the helmet so it feels even lighter, thereby helping to reduce fatigue. Interior Fit The interior fit is typical Arai, benefitting from over 50 years of research and refinement, and resulting in a helmet that, as mentioned previously, more closely matches the shape of the human head. The first is snug, allowing for the smallest possible helmet to be worn while still being comfortable. Wider Eyeport Larger 90mm eyeport, top to bottom, than comparable Arai models, provides a better vertical view desired by many sedan drivers. For drivers not needing a shield, a visor peak option is available. Removable/Replaceable Cheekpads The cheekpads are removable and washable for easier cleaning. More importantly, they’re replaceable with optional sizes of varying thicknesses for a more custom, personalized fit. VentilationThe upper ventilation system incorporates two large intake ducts and the same two exhaust vent ducts found on the GP-5(PED). This vent system allows for improved air flow even within the confines of a sedan or closed cockpit. M6 Anchor Type Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.

Size Guide

The legendary Dominator is the most innovative, popular and successful open wheel helmet that Bell has ever produced. The Dominator.2 is a worthy successor to the legacy of the original Dominator and is the next evolution in compact, lightweight aerodynamic helmet design and performance. The Dominator.2 incorporates the latest technology and updates while retaining the aggressive and distinctive Dominator styling, this helmet is designed for open wheel, dirt track and kart racers who demand aerodynamic stability, outstanding comfort and fit plus superior ventilation.

This is the Matte Black 61cm (7 5/8″) size version.

Features :

• Built-in Aero Gurneys for High Speed Stability and Performance
• Lightweight Carbon Composite Shell Technology
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrated Radio Microphone Systems
• Ultra Plush Grey Comfort-Max FR Interior Fabric for Improved Comfort and Superior Moisture Wicking Properties
• Pro-Style, Multi Foam Density Interior with Contoured Cheek Pads for Professional Fit With Extra Firm Neck Collar Support
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Positive Visor Seal Prevents Dust From Entering the Eyeport
• Full Ventilation (Chin Bar, Forehead, Top Vents)
• Standard Size Eyeport
• 287 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head & Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included

The versatile GTX3 Carbon, used extensively on race tracks across North America provides industry-leading performance and is a perfect choice for racers competing in open wheel forms of motorsports including formula, karting and dirt-track forms of racing. Featuring an ultra-lightweight carbon shell, integrated rear wing for enhanced aerodynamic performance at higher speeds, venturi air-exchange system, and double screen anti fog (DSAF) shield, the GTX3 Carbon is ideal for dirt track and other challenging forms of racing.

Features:

The GTX3 features a lightweight carbon composite shell and sleek aero styling for enhanced performance at higher speeds. The GTX3’s integrated double screen anti-fog (DSAF) shield and rear-facing vents allow air exchange and clear vision while preventing dust and dirt from entering the helmet, making it an ideal choice for racers competing in dirt-track forms of racing in addition to open wheel, formula and karting.

Features:

All SA2015 helmet sales are final sale with no returns.

The M.8 Carbon is the next evolution in Bell’s legendary M series design concept incorporating traditional styling, enhanced visibility and versatile features allowing the helmet to be used in all forms of racing. The M.8 Carbon provides outstanding comfort and features including a lightweight composite shell, Comfort-Plus interior, superior ventilation with manual lever air intake vents and a large eye opening. The M.8 Carbon is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance. This is the helmet in size extra large.

Features

• All-Purpose, Versatile Helmet
• Traditional Bell Styling
• Ultralightweight Carbon Fiber Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Large Size Eye port
• SRV-8 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Sizes XXS (54-55) to 4XL (67-68) – Largest Size Range of Any Bell Model
• Available in White or Matte Black
• Snell SA2020 Homologation
• FIA8859-2015 Homologation

Size chart

Based on the HP7 design and featuring an ultra-lightweight carbon shell using Bell’s high-pressure proprietary molding system, the RS7 Carbon uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels with air intake covers. The RS7 Carbon is available in three versions: RS7 Carbon, RS7 Carbon with Ear Cups, RS7 Carbon with Front Chin Bar Gurney.

Features:

• Based on the Innovative HP7
• Ultra-lightweight carbon shell
• High-pressure molding system for improved shell strength
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Hollow synthetic rubber gasket seal ensuring that air and water can’t penetrate into the helmet
• Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
• Aerodynamic accessories including chin bar and top gurneys and rear spoiler (sold separately) for improved aero performance and stability at high speeds
• Adaptable for closed car forms of racing with top forced air inserts including eyeport, 8 hole and 10 hole options to improve internal ventilation when used with forced air system (sold separately)
• Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
• Ultra plush grey comfort-max FR interior fabric for improved comfort and superior moisture wicking properties
• Narrow size eyeport
• SE07 3MM DSAF Shield (SV SE07 pivot system) – clear shield
• Double screen anti-fog (DSAF) visor insert For Improved anti-fog Pperformance
• M6 terminal hardware for head and neck restraint devices
• Draw string helmet bag included
• Hex wrench included
• Sizes 7 1/8 minus (57-) to 7 5/8+ (61+)
• Carbon finish
• Snell SA2015 homologation
• FIA8859-2015 homologation

Size chart

Developed through a collaboration with Penske Racing to reduce weight and enhance airflow for use in NASCAR, this ultra-lightweight version of the RS7 Carbon combines an aerospace-grade carbon shell, reinforced energy absorbing liner system and the performance features of the HP7 to create the most advanced, lightweight SA rated helmet that can be used in North America’s most demanding forms of racing. Penske Racing challenged Bell’s engineering team to develop a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, used with or without ear cups in an ultra-lightweight configuration, delivered race-ready under 2.75 pounds. Always up to the challenge, Bell delivered with the innovative RS7 Carbon

This is the 58 cm (7 1/4) size version.

Features:

• Aerospace grade ultra-lightweight carbon shell
• Advanced multi-density, multi piece liner to maximize energy absorption and impact performance
• Multi-purpose fit system that can be used with or without ear cups (ear cups included)
• Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
• Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
• Interior ventilation channels enhanced to maximize airflow
• Shell and shield design optimized to improve aerodynamic performance, reduce internal noise and enhance energy management capacities
• Integrated channels in face piece offer multiple options to install drink tube and radio systems
• Available in two versions: standard RS7C LTWT and RS7SC LTWT (non-ventilated)
• Top spoiler, top and chin bar gurneys available separately
• Top air attachments available separately
• Factory installed Hans anchors as original equipment
• Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
• Shield and pivot kit: SE07, SV(SE07)
• Homologation: Snell SA2020
• Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order)
• Color: Carbon

The Sport is designed for entry level racers who demand value and quality at an affordable price. The Sport incorporates classic Bell design styling, standard size eye opening, comfortable interior fit and a lightweight composite shell. The all-purpose Sport offers closed face protection, a wide range of features, full ventilation and is a perfect choice for racers on a budget or enthusiasts just entering the sport.

Features

• All-Purpose Helmet with Classic Bell Styling
• Lightweight Composite Shell
• E-Max Multi-Density Energy Absorbing Liner
• Full Chin Bar, Forehead & Top Ventilation
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Comfortable Standard Interior Fit
• Positive Visor Seal Prevents Dust From Entering the Eyeport
• Standard Size Eyeport
• 281 3 mm SRV Shield (SRV-2 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Snell SA2015 Homologation
• White color & size medium version

Size chart

All SA2015 helmet sales are final sale with no returns.

CSF Radiators are made from military grade aluminum to surpass any other radiator on the market for quality and durability. Each radiator undergoes the most testing we’ve ever seen, with everything from burst pressure to wind tunnel testing, CSF demands the most out of their radiators to ensure they are the best performing and highest quality radiator you can buy. Each radiator is designed to have drop in fitment, and require no modifications for installation. CSF even ensures their packaging is the best. Each package is built to withstand a 10 foot drop to make sure that when you get your radiator, it’s flawless.

CSF Radiators Feature:

• Drop-in fit radiator requires no modification for install
• Designed with OE fitment specifications and mounting
• TIG welded military grade aluminum
• “B-Tube” technology offers 15% better heat dissipation than standard O tubes
• Undergoes leak, thermal cycle, burst, vibration and wind tunnel testing
• Ideal for any type of racing or daily use
• “Show Stopper” hand polish mirror finish

This a special half size radiator that comes with a shroud and 12″ SPAL fan.

Vehicle Fitment :

• 2003-2007 Mitsubishi Evo 7-9 4G63
• 1992-2000 Honda Civic