Category: Uncategorized
Deatschwerks DWR1000 Fuel Pressure Regulator
Deatschwerks DWR1000 Fuel Pressure Regulator
Deatschwerks DWR1000 Fuel Pressure Regulator
$169.00
$169.00
- Pressure adjustable
- Comes in Black or Titanium
Description
Deatschwerks Fuel Pressure Regulators are designed for universal fitment and can be adapted to nearly every single fuel application. Developed with E85 in mind, these regulators are alcohol fuel safe and rated suitable for up to 1000 HP vehicles. Made out of anodized T6061 aluminum, the casing can withstand heat and abuse. The inner 45mm diaphragm allows pressure to be adjusted anywhere from 30 to 100 PSI.
The fittings on this regulator are -6AN, two for input and one for output. The vacuum port is a 1/8″ hose barb.
Available in Black or Titanium.
Details
| Manufacturer Part # | 6-1000 |
|---|---|
| Country of Manufacture | China |
| Weight | 2.00 lbs (0.9 kg) |
| Height | 7″ (17.8 cm) |
| Width | 3″ (7.6 cm) |
| Length | 5″ (12.7 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
relatedproducts
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
Design Engineering Black Exhaust Manifold Wrap 1″ x 100′
Design Engineering Black Exhaust Manifold Wrap 1″ x 100′
Design Engineering Black Exhaust Manifold Wrap 1″ x 100′
$77.69
$55.94
Black color. 1″x100′ roll.
Description
Black Exhaust Wrap offers a few solutions to heat dissipation. With the promotion of increased heat flow for improved performance, this extremely pliable hi-tech carbon fiber design reduces temperatures and offers up to 1800ËšF direct/2500ËšF intermittent heat resistance.
Features:
- DEI HT Silicone Coating not required
- Pre-wetting roll not necessary for wrapping
- High resistance to abrasions, oil spills, temperatures and vibration breakdown
Specifications
| Color | Black | See more like this |
|---|---|---|
| Width | 1 inch | See more like this |
| Length | 100 ft | See more like this |
| Kit or Single | Single | See more like this |
Details
| Manufacturer Part # | 010118 |
|---|---|
| GTIN | 00607078101181 |
| Weight | 13.30 lbs (6.0 kg) |
| Height | 2.5″ (6.4 cm) |
| Width | 7.5″ (19.1 cm) |
| Length | 8″ (20.3 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Design Engineering Exhaust Manifold Heat Sheath 1.5″ x 3′
Design Engineering Exhaust Manifold Heat Sheath 1.5″ x 3′
Design Engineering Exhaust Manifold Heat Sheath 1.5″ x 3′
$24.75
$12.37
Heat protection for cables and sensor wires. 1.5″ x 3′ roll.
Description
Designed to slide over wires, cables and hoses, Heat Sheath™ provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath™ is fireproof and withstands direct heat up to 500°F. Direct Heat Resistance: 500°F Radiant Heat Resistance: 2000°F Features:
- Pliable for tight bends
- Capable of withstanding 2000°F radiant heat
- Trim to desired length
Specifications
| Type | Sleeve | See more like this |
|---|---|---|
| Max Direct Heat | 500 F | See more like this |
| Diameter | 1.5″ | See more like this |
| Length | 3′ | See more like this |
Details
| Manufacturer Part # | 010420 |
|---|---|
| GTIN | 00607078104205 |
| Weight | 0.22 lbs (0.1 kg) |
| Height | 1.5″ (3.8 cm) |
| Width | 10.25″ (26.0 cm) |
| Length | 3.5″ (8.9 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Design Engineering Tan Exhaust Wrap And Aluminum HT Coating (Clamshell Packaging)
Design Engineering Tan Exhaust Wrap And Aluminum HT Coating (Clamshell Packaging)
Design Engineering Tan Exhaust Wrap And Aluminum HT Coating (Clamshell Packaging)
$140.16
$100.92
- Exhaust manifold wrap kit including wrap, Locking ties, and Locking Tie Tool.
- Tan color.
Description
An all-in-one kit for wrapping a set of headers or motorcycle pipes. Automotive kit includes two 2” x 50ft rolls of exhaust wrap one can of HT Silicone Coating & Locking Ties. The header wrap kit is enough for any set of V8 headers. The Header Wrap Kit will wrap from the top of the header where it bolts to the heads all the way down to the collector. Exhaust Wrap Kits save you time and money.
Direct Heat Resistance: 1800°F
Radiant Heat Resistance: 2500°F
Kit includes:
- 2x 2″ x 50′ Tan Exhaust Wrap
- 8x 8″ Locking Ties
- 4x 14″ Locking Ties
- 1x Locking Tie Tool
Specifications
| Color | Tan | See more like this |
|---|---|---|
| Width | 2 inch | See more like this |
| Length | 50 ft | See more like this |
| Kit or Single | Kit | See more like this |
Details
| Manufacturer Part # | 010093 |
|---|---|
| GTIN | 00607078100931 |
| Weight | 5.00 lbs (2.3 kg) |
| Height | 2.5″ (6.4 cm) |
| Width | 13″ (33.0 cm) |
| Length | 7.5″ (19.1 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Detroit Muscle Flex Fit Hat Arctic Camo with Black Puff Logo
Detroit Muscle Flex Fit Hat Arctic Camo with Black Puff Logo
Detroit Muscle Flex Fit Hat Arctic Camo with Black Puff Logo
$20.00
Size Small/Medium – Large/X-Large
Description
Arctic Camo Flex Fit Hat with Black Puffy Embroidered Detroit Muscle Logo Front, More Power More Speed Embroidered back, Structured Hat
Fitment
This product fits the following cars:
| Year | Make | Model | Trim | Notes |
|---|
Details
| Manufacturer Part # | DTM-1090WC |
|---|---|
| Weight | 1.00 lbs (0.5 kg) |
| Height | 5″ (12.7 cm) |
| Width | 10″ (25.4 cm) |
| Length | 7″ (17.8 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Drake Muscle Cars
Drake Muscle Cars
All products by Drake Muscle Cars
Edge
Edge
All products by Edge
Exhaust
Exhaust & Header Wrap
Exhaust & Header Wrap
2 filters selected
Price
Brand
In Stock
Color
Width
Length
Kit or Single
