The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Poly Tetra Fluoro Ethylene (PTFE) allow tighter radius bends, are lower weight and have zero fuel vapor permeability compared to CPE hoses. They are pressure rated up to 1000 psi in stainless steel and black nylon.

Part number 6-02-0863-20 is 20 ft of PTFE hose, AN-10 size with stainless steel exterior. See spec sheet for further details and other Deatschwerks hose options.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Poly Tetra Fluoro Ethylene (PTFE) allow tighter radius bends, are lower weight and have zero fuel vapor permeability compared to CPE hoses. They are pressure rated up to 1000 psi in stainless steel and black nylon.
Part number 6-02-0864-20 is 20 ft of PTFE hose, AN-6 size with black nylon exterior. See spec sheet for further details and other Deatschwerks hose options.

Deatschwerks fittings have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This adapter kit allows you to install fuel lines and remove them with ease for servicing or component replacement, the fittings can connect a 6AN Female flare to 5/16″ male line.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This is a connector designed to go in-between panels or walls as not to damage hoses from rubbing or kinking, making a 90-degree bend whilst ensuring a tight seal with it’s 6AN and 5/16th connectors.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This straight AN-8 fitting can be used to connect to any CPE (synthetic rubber) hose to an AN-8 component.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Poly Tetra Fluoro Ethylene (PTFE) allow tighter radius bends, are lower weight and have zero fuel vapor permeability compared to CPE hoses. They are pressure rated up to 1000 psi in stainless steel and black nylon.

Part number 6-02-0862-20 is 20 ft of PTFE hose, AN-8 size with stainless steel exterior. See spec sheet for further details and other Deatschwerks hose options.