DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 90 degree AN-10 fitting can be used to connect to any CPE (synthetic rubber) hose to an AN-10 component.

DW200 series, 255lph in-tank fuel pump w/ install kit for Civic (Excludes Si) 06-11

DeatschWerks, LLC provides high-performance fuel system solutions for the automotive aftermarket. Located in Oklahoma City, OK, DW houses all of the company’s functions including design, end-manufacturing, quality assurance, sales, marketing, and administration in its 36,000sf facility. DeatschWerks’ roots were established in 2004 by offering high flow drop-in fitment fuel injectors. In 2009 DW expanded into fuel pumps with the DW300, the highest flowing in-tank fuel pump of its time. Since then, DW has developed a wide range of innovative fuel system components which include in-tank and in-line pumps, surge tanks, fuel rails, fuel filters, pressure regulators, and fuel-specific lines, fittings, and adaptors. Today, the DeatschWerks line-up of fuel system components includes over 1100 SKUs covering Sport Compact, Modern Muscle, Euro, and Powersport applications.

California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Deatschwerks offers a variety of fittings for custom fuel setup applications. Caps and plugs are used to end fuel flow, and to prevent a hose or component from spilling or leaking fuel. The caps and plugs are very simple and straight-forward to install, and should always have the gasket checked if necessary before re-use or maintenance.

This is a 6AN cap that can be threaded onto the end of male fittings and hose ends

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This coupler will join a 6AN Female Flare to an M12 x 1.5 Female Metric fitting/line, Includes crush washer to ensure a tight seal.

All couplers can be installed anywhere in-line, and as long as they installed properly they will not leak and can with-stand years of high volume flow and demand for delivery.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Chlorinated Polyethylene (CPE) hoses are lined for compatibility with ethanol-based fuels up to E85. They are also cord reinforced for high pressure up to 350 psi in black nylon.

Part number 6-02-0816-3 is 3 ft of CPE hose, AN-8 size with black nylon exterior. See spec sheet for further details and other Deatschwerks hose options.

Deatschwerks offers a line of fittings, making it possible to attach multiple lines of different sizes and thread diameters. These fittings allow the attachment of one end to be attached to AN hosing, and the other end can be threaded into products and plumbing with NPT diameter threads.

This adapter can fit one 8AN hose on one side, and can fit 1/4 NPT on the other end.

Deatschwerks couplers have been produced to help deliver fuel from your tank to your engine with optimal performance and flow in mind. Non-restrictive, and manufactured to every applicable JIC and SAE standard , these couplers are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This is a 8AN one way check valve designed to permit flow one way but not the other. Examples of applications would include at the end of your fuel rail to allow return to the tank but retain pressure when shut off.

All couplers can be installed anywhere in-line, and as long as they installed properly they will not leak and can with-stand years of high volume flow and demand for delivery.