Category: Uncategorized
Design Engineering 20″ Locking Ties Pack
Design Engineering 20″ Locking Ties Pack
Design Engineering 20″ Locking Ties Pack
$29.35
$21.13
pack of 20″ Locking Ties
Description
Stainless Locking Ties are the perfect way to secure Exhaust Wrap. Made from 316 stainless steel and self locking, just like cable or zip ties. Capable of withstanding up to 2500 F and in two styles, smooth and positive locking. They also are great for securing cables, wires and anywhere you would use standard cable ties.
Details
| Manufacturer Part # | 010203 |
|---|---|
| GTIN | 0607078102034 |
| Weight | 0.13 lbs (0.1 kg) |
| Height | 4″ (10.2 cm) |
| Width | 12.5″ (31.8 cm) |
| Length | 0.25″ (0.6 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Design Engineering Cool Tape 1.5″ x 30′
Design Engineering Cool Tape 1.5″ x 30′
Design Engineering Cool Tape 1.5″ x 30′
$40.38
$30.29
Heat Protection tape. 1.5″ x 30′ roll.
Description
Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is an ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F Features:
- Withstands direct heat up to 400°F
- Use to secure panels, seal air boxes, wrap wiring & more
- Strong self-adhesive backing
- Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look!
Specifications
| Width | 1.5 inch | See more like this |
|---|---|---|
| Length | 30 | See more like this |
Details
| Manufacturer Part # | 010416 |
|---|---|
| GTIN | 0607078104168 |
| Weight | 0.37 lbs (0.2 kg) |
| Height | 2″ (5.1 cm) |
| Width | 7.25″ (18.4 cm) |
| Length | 5.25″ (13.3 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Design Engineering Tan Exhaust Wrap 6″ x 100′
Design Engineering Tan Exhaust Wrap 6″ x 100′
Design Engineering Tan Exhaust Wrap 6″ x 100′
$260.12
$130.06
- Tan color.
- 6″x100′ roll.
Description
Tan Exhaust Wrap offers a few solutions to heat dissipation. With the promotion of increased heat flow for improved performance, this extremely pliable hi-tech carbon fiber design reduces temperatures and offers up to 1800ËšF direct/2500ËšF intermittent heat resistance.
Features:
- DEI HT Silicone Coating not required
- Pre-wetting roll not necessary for wrapping
- High resistance to abrasions, oil spills, temperatures and vibration breakdown
Specifications
| Color | Tan | See more like this |
|---|---|---|
| Width | 6 inch | See more like this |
| Length | 100 ft | See more like this |
| Kit or Single | Single | See more like this |
Details
| Manufacturer Part # | 010104 |
|---|---|
| GTIN | 00607078101044 |
| Weight | 1.98 lbs (0.9 kg) |
| Height | 2.5″ (6.4 cm) |
| Width | 7.5″ (19.1 cm) |
| Length | 8″ (20.3 cm) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us at [email protected].
Detroit Muscle Devil Girl Hell on Wheels 2X-Large
Detroit Muscle Devil Girl Hell on Wheels 2X-Large
Detroit Muscle Devil Girl Hell on Wheels 2X-Large
$20.00
Size 2X
More details
| Click to view other sizes and versions
| Click to see if this fits my vehicle
Description
- 5.6 oz., pre-shrunk 50/50 cotton/polyester
- Black T-Shirt, one color White silkscreen print front and back
- DryBlend technology delivers moisture-wicking properties
- Double-needle stitched neckline, bottom hem and sleeves
- Heat transfer label
- Designed and Printed in the USA
Details
| Manufacturer Part # | DTM-9004BK-2X |
|---|---|
| Weight | 1.00 lbs (0.5 kg) |
| Height | 1″ (2.5 cm) |
| Width | 1″ (2.5 cm) |
| Length | 1″ (2.5 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Dorman
Dorman
Showing 250 of 250 Dorman products:
ECU Wiring Harnesses
ECU Wiring Harnesses
1 filter selected
Brand
In Stock
Order by:
AEM-303609
AEM CD Carbon Dash IP67 Communications Cable
AEM CD Carbon Dash IP67 Communications Cable
$55.41
$49.87
AEM-303609
Mfg. Part # 30-3609
- Replacement cable for logging models
- Secondary/Backup cable for in-and-out maneuverability
IN STOCK: 1
AEM-305563
AEM CD Carbon Dash Replacement Wiring Harness
AEM CD Carbon Dash Replacement Wiring Harness
$33.30
$29.97
AEM-305563
Mfg. Part # 30-5563
Pre-pinned and ready to install replacement/ secondary harness
IN STOCK: 3
AEM-30-3501
AEM Infinity 506/508 Honda/Acura B/D/H Plug and Play Jumper Harness
AEM Infinity 506/508 Honda/Acura B/D/H Plug and Play Jumper Harness
$281.89
$253.70
AEM-30-3501
Mfg. Part # 30-3501
Honda/Acura 1992-1995 B/D/H Series OBD1 engines
IN STOCK: 1
AEM-3023532
AEM Infinity Series 7 GM LS Plug & Play Engine Harness
AEM Infinity Series 7 GM LS Plug & Play Engine Harness
$693.37
AEM-3023532
Mfg. Part # 30-3532
- Install your GM LS motor with simplicity
- Plug & Play harness comes with 18 crucial connectors
- Very minimal wiring necessary to complete the power distribution center connections
Ships in 1 Day
Energy Suspension
Energy Suspension
Showing 250 of 250 Energy Suspension products:
Exhaust & Header Wrap
Exhaust & Header Wrap
1 filter selected
Brand
Color
Length
Kit or Single
12 of 60 items meet your selection
Order by:
DEI-010118
Design Engineering Black Exhaust Manifold Wrap 1″ x 100′
Design Engineering Black Exhaust Manifold Wrap 1″ x 100′
$77.69
$55.94
DEI-010118
Mfg. Part # 010118
Black color. 1″x100′ roll.
OUT OF STOCK
DEI-010116
Design Engineering Black Exhaust Manifold Wrap 2″ x 100′
Design Engineering Black Exhaust Manifold Wrap 2″ x 100′
$115.77
$83.35
DEI-010116
Mfg. Part # 010116
- Black color.
- 2″x100′ roll.
OUT OF STOCK
DEI-010085
Design Engineering Black Exhaust Manifold Wrap 8″ x 100′
Design Engineering Black Exhaust Manifold Wrap 8″ x 100′
$340.92
$245.46
DEI-010085
Mfg. Part # 010085
Black color. 8″x100′ roll.
OUT OF STOCK
DEI-010002
Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 100′
Design Engineering Black Titanium Exhaust Manifold Wrap 2″ x 100′
$127.63
$91.89
DEI-010002
Mfg. Part # 010002
Black color. 2″x100′ roll.
OUT OF STOCK
DEI-010117
Design Engineering Tan Exhaust Manifold Wrap 1″ x 100′
Design Engineering Tan Exhaust Manifold Wrap 1″ x 100′
$70.31
$50.62
DEI-010117
Mfg. Part # 010117
- Tan color.
- 1″x100′ roll.
OUT OF STOCK
DEI-010109
Design Engineering Tan Exhaust Manifold Wrap 8″ x 100′
Design Engineering Tan Exhaust Manifold Wrap 8″ x 100′
$320.13
$230.49
DEI-010109
Mfg. Part # 010109
- Tan color.
- 8″x100′ roll.
OUT OF STOCK
DEI-010103
Design Engineering Tan Exhaust Wrap 2″ x 100′
Design Engineering Tan Exhaust Wrap 2″ x 100′
$108.79
$78.33
DEI-010103
Mfg. Part # 010103
- Tan color.
- 2″x100′ roll.
IN STOCK: 1
DEI-010104
Design Engineering Tan Exhaust Wrap 6″ x 100′
Design Engineering Tan Exhaust Wrap 6″ x 100′
$250.12
$180.09
DEI-010104
Mfg. Part # 010104
- Tan color.
- 6″x100′ roll.
OUT OF STOCK
DEI-010133
Design Engineering Titanium Exhaust Manifold Wrap 1″ x 100′
Design Engineering Titanium Exhaust Manifold Wrap 1″ x 100′
$84.03
$60.50
DEI-010133
Mfg. Part # 010133
- Titanium color
- 1″ x 100′ roll
IN STOCK: 6
DEI-010130
Design Engineering Titanium Exhaust Manifold Wrap 2″ x 100′
Design Engineering Titanium Exhaust Manifold Wrap 2″ x 100′
$123.56
$88.96
DEI-010130
Mfg. Part # 010130
Titanium color. 2″x100′ roll.
IN STOCK: 3
DEI-010134
Design Engineering Titanium Exhaust Manifold Wrap 4″ x 100′
Design Engineering Titanium Exhaust Manifold Wrap 4″ x 100′
$245.14
$176.50
DEI-010134
Mfg. Part # 010134
- Titanium color
- 4″ x 100′ roll
OUT OF STOCK
Exterior Lights
Exterior Lights
1 filter selected
Price
Brand
FIA homologated
4 of 5 products meet your selection
Order by:
CTK-LR-RB
Cartek Afterburner Rain/Brake Light
Cartek Afterburner Rain/Brake Light
$139.93
FIA rain/brake light usable as on/off or flashing at 4 Hz. Available for vertical or horizontal mount.
IN STOCK: 8
CTK-LR-F3
Cartek FIA F3 Multi-Mode Rain Light (Static / Flashing / Hazard)
Cartek FIA F3 Multi-Mode Rain Light (Static / Flashing / Hazard)
$160.93
- FIA rain/brake light usable as static or flashing at 4 Hz
- Comes with switch
- Available for vertical or horizontal mount
IN STOCK: 3
CTK-CK-LRS-15RM
Cartek FIA Rectangular Rain Light (Static/Flashing)
Cartek FIA Rectangular Rain Light (Static/Flashing)
$139.60
CTK-CK-LRS-15RM
Mfg. Part # CK-LRS-15RM
FIA static rain/brake light
Estimated shipping: 1-2 weeks
