The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Chlorinated Polyethylene (CPE) hoses are lined for compatibility with ethanol-based fuels up to E85. They are also cord reinforced for high pressure up to 350 psi in black nylon.

Part number 6-02-0815-3 is 3 ft of CPE hose, AN-6 size with black nylon exterior. See spec sheet for further details and other Deatschwerks hose options.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than standard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This straight AN-6 fitting can be used to connect to any PTFE (teflon) fuel hose to any AN-6 component. A ferrule is included to create a high pressure leak free seal.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Poly Tetra Fluoro Ethylene (PTFE) allow tighter radius bends, are lower weight and have zero fuel vapor permeability compared to CPE hoses. They are pressure rated up to 1000 psi in stainless steel and black nylon.

Part number 6-02-0861-10 is 10 ft of PTFE hose, AN-6 size with stainless steel exterior. See spec sheet for further details and other Deatschwerks hose options.

DW fuel fittings are manufactured to every applicable JIC and SAE standard and are constructed of heat-treated 6061 T-6 aluminum that is anodized in a titanium finish. The titanium finish compliments both OE and aftermarket engine bays and hides tool marks far better than sandard black fittings. These high-grade materials and coatings are strong, light, and anti-corrosive for use in the most demanding fuel systems.

This 60 Degree AN-8 fitting can be used to connect to any PTFE hose to an AN-8 component.

The proper selection of reliable hoses are integral to any fuel system. Deatschwerks makes a number of different braided hoses, covering most applications required for transferring fuel or other fluids. This line of Chlorinated Polyethylene (CPE) hoses are lined for compatibility with ethanol-based fuels up to E85. They are also cord reinforced for high pressure up to 500 psi in stainless steel.

Part number 6-02-0813-3 is 3 ft of CPE hose, AN-8 size with stainless steel exterior. See spec sheet for further details and other Deatschwerks hose options.