DeatschWerks DW440 brushless in-tank electric fuel pumps have a total height of only 4 in., making them easy to retrofit into any OE pump module. Brushless technology reduces friction and heat, increases efficiency, vastly improves pump lifespan in ethanol and methanol fuels—and allows higher voltage inputs for increased flow! These pumps move 440 lph of fuel at 40 psi.

Each fuel pump includes a controller, which accepts an 8-22 V DC input and creates a digital signal to allow precise speed and torque control. The controllers are available in three configurations: single speed, dual speed, and PWM-controlled. Controller are designed to be used with voltage boosters, and the pump kits also include bulkhead wiring.

Model Compatibility

• Ford Mustang 1999-2004

The redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. In order to achieve a flatter flow curve, Deatschwerks uses a dual zone approach which increases flow where specifically engineered for high pressure, and limits flow at low pressure, thus achieving excellent performance and reliability. The DW400 has a 36mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

The redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. In order to achieve a flatter flow curve, Deatschwerks uses a dual zone approach which increases flow where specifically engineered for high pressure, and limits flow at low pressure, thus achieving excellent performance and reliability. The DW300 has a 39mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Made in Germany in collaboration with Bosch, this fuel pump is capable of supplying 1000HP gas engines with 415 lph at 40 psi. It can also do 350 lph at 80 psi and 750HP on E85, making it a very versatile pump. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 “e85”, at pressures between 70 and 100 psi. The DW400 has a 46mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-1048 install kit is designed for:

• 03-13 Chevrolet Corvette
• 10-13 Chevrolet Corvette Grand Sport
• 03-04Chevrolet Corvette Z06
• 06-13 Chevrolet Corvette Z06

The redesigned V2 DW300 flows 26% higher at peak and 20% greater on average. It will flow 340 lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature.

In order to achieve a flatter flow curve, Deatschwerks uses a dual zone approach which increases flow where specifically engineered for high pressure, and limits flow at low pressure, thus achieving excellent performance and reliability.

The DW300 has a 39mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Pro Cell® offered by Fuel Safe is just as versatile as it is durable. No competitor can reach the excellence and guarantee of quality goods like Fuel Safe can. Pro Cells are designed specifically for use with hydrocarbon fuels but have been successfully used by top teams running ethanol blends up to and including E85. The Fuel Safe Pro Cell is the fuel cell of choice for top off road, road race and circle track racers around the globe. Pro Cell also has the ability to be create a seamless bladder design to any custom fuel cell.

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• 6 x 10 aluminum fill plate with a provision for a sending unit.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Collector system with three poly trap doors (upgrades available, or swap for surge tank)
• Limited 5 year manufacturer warranty

Configuration for any cell variation is available upon request and can include – capacity, fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This Aluminum tank has a 5 Gallon capacity.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Sportsman® cell is their most cost effective soft bladder fuel cell. The Sportsman® cell meets all FIA-FT3 requirements and is designed for use with all hydrocarbon fuels. The Sportsman® bladders are constructed with a proprietary pre-coated fabric that offers a great balance of performance and price

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• SF6X10E aluminum fill plate comes with a -8 pickup, -8 return, -8 rollover vent valve, high quality threaded aluminum fill cap and a sending unit position.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Limited 5 year manufacturer warranty

The configuration for any cell model can be customized upon request and can include – fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This Aluminum tank has an 18 gallon capacity, and has a vertical end flange.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Sportsman® cell is their most cost effective soft bladder fuel cell. The Sportsman® cell meets all FIA-FT3 requirements and is designed for use with all hydrocarbon fuels. The Sportsman® bladders are constructed with a proprietary pre-coated fabric that offers a great balance of performance and price

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• SF6X10E aluminum fill plate comes with a -8 pickup, -8 return, -8 rollover vent valve, high quality threaded aluminum fill cap and a sending unit position.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Limited 5 year manufacturer warranty

The configuration for any cell model can be customized upon request and can include – fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This tank has a 32 gallon capacity.

The HANS Pro Ultra Lite is FIA approved. The Pro Ultra device applies aerospace grade carbon to achieve a 100+ gram weight saving compared to the regular Ultra. The Ultra Lite saves on weight and allows for easy entry and exit from the race car, even smaller tighter vehicles. The 100% carbon fiber construction features a hollow core for increased weight reduction without sacrificing strength. The sliding tethers offer exceptional visibility.

Each HANS Device is sold complete with two anchors (enough for one helmet) and matching tether. This is the post anchor version in size medium and with a 20 degree angle.

The HANS device (Head and Neck Support) was developed to prevent neck injuries and skull fractures by restraining your head from snapping forward in the event of an accident. The HANS III represents the third generation of injection molded HANS devices and features a contemporary approach to reducing weight. Using an all new design and polymer, the device features a hollow collar that substantially minimizes weight. Engineered reinforcements ensure an exceptionally strong structure that provides the same level of safety as every HANS device. The reduced mass guarantees the lightest and most comfortable injection molded HANS ever.

Two flexible tethers on the collar are attached to the helmet to prevent the head from snapping forward or to the side during a wreck. This dissipates the force of a crash from your neck and distributes it to your shoulders and chest, reducing impact. The Hans Device has proven so effective it has been mandated by virtually all professional racing sanctioning bodies including NASCAR, NHRA, Formula 1, CART, the FIA, and even Monster Trucks.

Each HANS Device is sold complete with two post anchor attachments (enough for one helmet) and matching tether. This is the large size version with a 20 degree angle with FIA certification.