HPS Black High Temp Reinforced Silicone Radiator Hose Kit Coolant replaces your stock OEM rubber hoses with a premium quality silicone, which delivers race proven performance and can withstand high boost and high temperature during competition or daily driving. An upgrade for anyone looking to keep their running temperature down a few degrees, spruce up that engine bay, and guarantee yourself against leakage from an old component. Vehicle Fitment :

• BMW 01-06 E46 / M3
• BMW 01-06 E46 330Ci M54 3.0L
• BMW 01-05 E46 325i 325Xi M54 2.5L
• BMW 01-05 E46 330i 330Xi M54 3.0L
• BMW 99-00 E46 328i M52 2.8L
• BMW 99-00 E46 323i M52 2.5L
• BMW 99-00 E46 328Ci M52 2.8L
• BMW 99-00 E46 323Ci M52  2.5L

This brand new 10pcs complete set HPS High Temp Reinforced Green Silicone Radiator Hose Kit for Kawasaki 04-09 KFX700 is designed to replace all stock OEM rubber radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your KFX700 cooling system by replacing your old brittle hoses now before it’s too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your KFX700, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant hose kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence.

This product fits Kawasaki 04-09 KFX700

HPS red high temp 3-ply reinforced silicone coolant hose kit (part number 57-1675-RED) replaces 15-16 Dodge Charger R/T Scat Pack 392 6.4L V8 stock OEM rubber upper and lower radiator hoses, heater hoses with high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F).

Key Features– The premium grade high-heat resistance reinforced silicone hoses are made with correct bends and curves to ensure a perfect fitment.
– Includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut thru the silicone hoses.
– Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber upper and lower coolant hoses.
– Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat.
– HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty.

Vehicle Application2018 Dodge Charger R/T Scat Pack 392 6.4L V8
2017 Dodge Charger R/T Scat Pack 392 6.4L V8

Replace the following OEM coolant hosesUpper Hose – OEM Part Number: 05040052AC
Lower Hose – OEM Part Number: 68248846AE
Heater Hoses OEM Part Numbers: 68248847AF,68237767AC,55038134AF

HPS red high temp 3-ply reinforced silicone radiator hose kit (part number 57-1698-RED-7) replaces 2000 BMW 328Ci M52 2.8L stock OEM rubber coolant hoses with high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F).

Key features– Vehicle Application: 2000 BMW 328Ci M52 2.8L. The hoses are made with correct bends and curves to ensure a perfect fitment.
– The hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut thru the silicone hoses.
– Premium grade high-heat resistance reinforced silicone hoses ensure the long lasting quality over the OEM rubber coolant hoses.
– Ideal for extremely high temperature service and prolonged exposure to under-hood and coolant heat.
– HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty.

The hoses are compatible with OEM / Aftermarket Hoses Part Number: 17127510952, 11531436408

Vehicle application details2000 BMW 328Ci M52 2.8L M52

Need new drive pins for your center lock equipped Porsche and don’t feel like getting robbed by the dealer? Girodisc has the answer, our center lock drive pin kits are manufactured 100% in house to tighter tolerances than the OEM Porsche units and then anodized for long lasting protection.

Each kit includes 5 drive pins and related hardware, enough for one wheel. If you need a complete car set select quantity 4.

The Girodisc system is a direct replacement for the OE rear disc on the 981 GT4 with OEM iron rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.

The central hat section of their rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from their own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to their own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

When used with performance pads and hi-temp fluid, you have what amounts to a truly amazing solution to overheating or warping rotors.

If your car same with OEM center lock wheels please select the center lock drive pin option.

Sold/priced in pairs.

Use with HANS devices which set up for post clip anchors, containing the metal clasps at the end of the tether instead of the sewn loops for quick clip attachments. For use with SA helmets not containing a built-in M6 nut washer. Fully SFI compliant, though FIA standard 8858-2010 only approves helmets with the nut washer built into the helmet, making use of these anchors not FIA compliant. The professional HANS post clips have aluminum bases and are sold as a pair for one helmet. Black color. Other colors available as well.