Improve lap times, increase car control, cut out the worry of many-years old factory parts breaking, and add a modern touch of flair to the cabin of your track car with these pedal boxes that mount directly right to the floor of the chassis with no cutting, welding or modification needed. Crafted from lightweight steel, OBP has designed a pedal box that mounts to anywhere in the car it is needed to be with little to no modification. This pedal box allows for the mounting of cylinders to remain inside the vehicle for easier maintenance, and to be able to better monitor your fluid levels. It also allows for a brake bias and adjuster to be installed in pair with the cylinders, so the operator can choose how much or how little pressure they would like towards the front or rear of the vehicle.

This pedal box is designed to be mounted on the floor using a bulkhead fit.

The pedals have a 4.9 – 5.45:1 ratio and the whole box weighs 7.2 lbs with bias bar, and NO master cylinders.

Universal 3-Spoke Mugello Series Wood Steering Wheel (OD/2023/LE) by OMP®. Handgrip: round, 30mm. Wheel Diameter: 13.78″ / 350mm. Grip Material: Wood. Wooden steering wheel with 3 aluminum spokes. The Mugello steering wheel is a competition motorsport steering wheel, and part of their vintage racing range.

This Steering Wheel is universal and requires OMP Wheel Mounting Hub for proper installation in your specific vehicle.

Pair of rear brake pads for BMW M2. Can fit multiple other BMW models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSL29 Compound Overview

The Pagid RSL29 compound, formerly known as Pagid RS29, is a long time favorite and reliable pad. It features very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Combined with easy bedding-in behavior, this compound is very popular in club racing, for track days, GT cars, touring cars and prototype endurance racing. Due to the excellent modulation characteristics, the RSL29 pads is also often used in sprint races.

Model Compatibility

• BMW M135i [F20 & F21] 11 – 16
• BMW M140i [F20] 15 +
• BMW M2 [F87]15 +
• BMW M235i [F22]13 +
• BMW M235i Racing [AP front caliper] 16 +
• BMW M235i Racing [PFC front caliper] 14 – 15
• BMW M240i [F22] 15 +
• BMW M3 [F80] 14 +
• BMW M4 [F82] 14 +
• BMW M4 [F82] Competition 16 +

Pair of rear brake pads for Porsche 991 and 992. Can fit multiple other Porsche models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSL29 Compound Overview

The Pagid RSL29 compound, formerly known as Pagid RS29, is a long time favorite and reliable pad. It features very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Combined with easy bedding-in behavior, this compound is very popular in club racing, for track days, GT cars, touring cars and prototype endurance racing. Due to the excellent modulation characteristics, the RSL29 pads is also often used in sprint races.

Model Compatibility

• 2011 – 2015 Porsche 991 Carrera / S
• 2015 + Porsche 991.2 Carrera / GTS
• 2018 + Porsche 992 Carrera / S / 4S
• 2009 – 2016 Porsche Panamera

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

The Racetech premium 6-point harness with 2″ shoulder straps is intended for use with a HANS/FHR device. This harness is FIA approved, but only when used correctly in conjunction with a HANS/FHR device. Features 2″ lap straps and 2″ crotch straps, which lock in via a ‘T’ bar to the lightweight cam-lock. Includes snap-hooks, eye-bolts and instructions for mounting in your vehicle. Snap-hooks can be removed to allow wrap-style fixing to your roll cage or harness bar (on crotch strap & shoulder belts). Small Bolt-down Tabs are available on lap belts for cars with tight clearances or without room for an eye-bolt and snap-hook setup.

All harnesses come standard with pull up adjusters on the lap straps. Available only in full-lightweight 6.4lbs (2.9kg). Featuring light-weight alloy adjusters and alloy cam lock. Orange color.

Building upon the successful 129 series, Racetech offers the same ergonomic form and incredible features, but in a lighter and more affordable package with the 4119HRW series. Used by many professional teams at both national and international level. There are now four sizes available: standard, wide, tall and wide-tall. This seat retains Racetech’s unique, patented, back mount design to give the driver ultimate support and a ‘feel’ of the chassis not available in basic floor-mounted seats. Customize your seat further with low base cushions or add side cushions for support in the thigh area.

The seats are finished with a black gloss shell made of GRP, black fire-retardant seat fabric and use black leather wear patches. The 4119HRW series seats are compliant with FIA 8855-1999 standards when back-mounted at the shoulder level to a roll cage except for the wide 4119WHR version.