Canton 20-854 Dipstick Universal Steel Braided For 1/4″ N.P.T. Fitting Install

Canton 22-302 Stud Kit For Oil Pan Mounting GM LS1

• Uses 1/2″ NPT female threads
• Made In USA
• Canton Racing Products has been building oil pans and engine related products for racing and high performance applications since 1981

• 12MM Blue 12V Led
• Made In USA
• (2) Ground Terminal Lugs

All the parts to plumb an Accusump

Kit provides you with all the parts to plumb an Accusump

Kit provides you with all the parts to plumb an Accusump

Kit provides you with all the parts to plumb an Accusump

Kit provides you with all the parts to plumb an Accusump

Kit provides you with all the parts to plumb an Accusump

Kit comes with heavy duty cable, mounting bracket, pipe fitting, and specially designed valve

• Allows convenient remote operation of Accusump in street, drag race and pre-oiling applications
• Wired directly into the ignition switch, the Accusump can be operated automatically
• Kit features pro version electric valve with 1/2″ NPT female thread in and out ports and a built-in 1/4″ NPT pressure sensor port

Converts a standard #24-270X to #24-271X specifications

Converts a standard #24-270X to #24-273X specifications

Converts a standard #24-270X to #24-275X specifications

• This Pro Electric Pressure Control Valve Kit is for a discharge/refill setting of 20-25 PSI
• Provides convenience of an electric valve for remote mounted units and the rapid refill rate of a manual valve as required in racing
• EPC valuing will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level

For discharge/refill setting of 35-40 PSI

For a discharge/refill setting of 55-60 PSI

• Supplies Pressurized Oil To The Turbo Bearings During Spool Down
• Made In USA
• Flow Reducing Fitting To Maximize Duration Of Discharge

Kit provides you with the parts needed to plumb an Accusump when external oil lines are present

• Billet Aluminum
• Made In USA
• Mounting brackets for 4-1/4″ Dia Accusump
• Sold in Sets of 2

• 1/2″ NPT Inlet Port
• 1/2″ NPT Outlet Port
• Machined Billet Aluminum
• Hardware Included
• 22 mm Thread Pitch
• 2 5/8″ Seal

• The mount uses the same 13/16 -16 thread filter nipple as stock to accept standard LS1 filters and features O-ring seals between the pan and the adapter
• Made In USA
• Billet aluminum spin-on filter mount
• Includes 1/4″ plug for an oil pressure sensor

• Billet aluminum
• Made In USA
• Adapter features O-ring seals between the pan and the adapter

• Radiator Style Neck Fill Point
• Made In USA
• Stationary Use Allows For Simple Piston Free Design

• 1/2″ NPT Inlet Port
• 1/2″ NPT Outlet Port
• Machined Billet Aluminum
• Hardware Included
• 3/4″ -16 Thread Pitch
• 2 5/8″ Seal

• Upgrade over standard gauge
• Recommended for severe duty and marine use
• Less affected by vibration

• Sold as a set of two
• Made In USA
• Steel band mounting brackets for our 1-QT 3-1/4″ Dia Accusump

• For 4-1/4″ Dia. Accusumps
• Required for Accusump
• Provides proper support to ensure tube doesn’t become distorted

Oil Input Sandwich Adapter Replacement O-Ring Kit

• CNC machined billet aluminum filter plate
• Fits 1967-1992 Chrysler 273-318 and 340-360 small blocks, replaces Mopar part # 2402-103
• Features an O-ring seal to eliminate the failure prone OEM paper gasket

• It is designed for use in high performance applications Includes two 1/2″ NPT in-ports and two 1/2″ NPT out-ports It can be plumbed right to left or left to right, for many plumbing options
• Made In USA
• Unused ports can be used for a temperature or oil pressure sender, or for Accusump input

• 1/2″ NPT Inlet Port
• 1/2″ NPT Outlet Port
• Machined Billet Aluminum
• Hardware Included
• 13/16″ -16 Thread Pitch
• 3 1/4″ Seal

• 1/2″ NPT Inlet Port
• 1/2″ NPT Outlet Port
• Machined Billet Aluminum
• Black Anodize Finish
• Hardware Included

• Designed for use in high performance applications
• Made In USA
• Accepts 3/4″, -16 spin-on oil filters
• Includes two 1/2″ NPT; in-ports and two 1/2″ NPT out-ports; Can be plumbed right to left or left to right, for many plumbing options
• Unused ports can be used for a temperature or oil pressure sender or for Accusump input

• Connects to existing oil feed lines
• Includes two 1/4″ compression fittings

• Connects to existing oil feed lines
• Includes two 3/8″ compression fittings

• Connects to existing oil feed lines
• Includes two 5/16″ compression fittings

Oil Cooler Sandwich Adapter Replacement O-Ring Kit

Spare 100 mic Replaceable Filter Disc for top lid outlet port.

Black push-in vacuum tubing, 8mm ID, 2m / 6ft length, black polyethylene, up to 10 bar / 150 psi

Competition Catch Can 0.5/1.0 O-Ring bottom and top lid 76 x 2.5mm

Dipstick Competition .5l (short version) and Performance .75l

Dipstick Competition 1,0l (long version)

Dipstick O-Ring 12 x 1.5mm

Performance Catch Can .75 O-Ring top lid 84 x 2mm.

Stainless steel media for Competition Internal Filter Unit.

• Change OEM thread to support your setup
• M22 to -AN10 straight connection

• Change OEM thread to support your setup
• M22 to -AN6 straight connection

• Change OEM thread to support your setup
• M22 to -AN8 straight connection

PushLock Hose End – M22 to -AN6 45 degree

• Connect oil system to engine with outward-facing hoses
• For use with Sikky oil pans only