Pair of front brake pads for Chevrolet Camaro. Can fit multiple other Chevy models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSL29 Compound Overview

The Pagid RSL19 compound, formerly known as Pagid RS19, is the best compound for endurance racing. It features very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. The friction level is enough for cars without power-assisted brake system and ensures comfortable low effort on the brake pedal. Constant temperatures up to 600 degrees C (1,100 degrees F) are possible. The combination fo friction value, fading stability, and low wear rates on pads and rotors realized with this pad compound is unmatched. However, due to its outstanding wear rate and drivability also works well for sprint races. This pad is a multiple winner of Daytona 24h, LeMans 24h, Sebring 12h, Spa 24h, Nurburgring 24h, often with no pad change and usually no rotor change.

Model Compatibility

• Chevrolet Camaro Z28
• Chevrolet Corvette C7 Z06
• Ferrari 430 Challenge
• Ferrari 430 Scuderia
• Ferrari 458 Italia
• Ferrari 599 GTB Fiorano
• McLaren 570S
• McLaren 650S
• McLaren 675LT
• McLaren MP4-12C

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line. 1/8” Steel vs. 3/16” steelPCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to. Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions: – 12 5/8″ (320mm) to 19 1/2″ (495mm) – 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. The PCI S1 sliders are one of the strongest sliders available. Each slider bolts to the base with 4 bolts making them twice as strong as 2 bolt mounting. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. PCI Slider Seat Mounts are designed to bolt directly to the factory seat mount locations and simplify that new race seat install.

1/8” Steel vs. 3/16” Steel

PCI mounts are laser cut and CNC formed completely from one piece for strength, stiffness and weight savings. With their design they can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by the claim that thicker or heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing putting more money in there pocket and less in yours. When your design requires welded on mounting legs 3/16″ steel is your only design option. PCI mounts will exceed the strength of the seat and floor they’re bolted to.

Features and benefits of a PCI Slider Mount:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• Multi way adjustability
• PCI S1 high strength sliders, mounts to base with 4 bolts per slider
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Grade 10.9 8mm hardware
• Powder coated base and side mounts
• ¼” black nylon side mount spacers
• Stainless steel laser etched logo plates
• CNC bent one piece design allows for use of lighter 1/8” steel vs. heavy 3/16”
• No modifications to any PCI seat mount components are required for installation
• Uniquely designed for each car for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting

Dimensions of base when fully extended and retracted:

– 14-3/4”­(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
– 16”­(406mm) to 18-3/4”(476mm) width adjustments (wide side mounts)
– 9 5/8”­(245mm) range front to back adjustments

A quality 6-point harness with wide 3″ shoulder straps and 2″ lap straps with loader spreader to pelvis. 2″ crotch straps lock in via a T bar to the lightweight cam-lock. Features velcro on the lap straps for fixing the belts to your seat fabric when the harness is not in use, allowing easy entry and exit from the vehicle. Includes snap-hooks, eye-bolts and instructions for mounting in your vehicle. Snap-hooks can be removed to allow wrap-style fixing to your rollcage or harness bar.

Racetech took their most popular seat and gave it a chop. The RT4119W (Wide) and RT4119WT (Wide & Tall) seats are based on the existing RT4119WHR and RT4119WTHR, but with the head restraints removed for improved visibility and access in a ‘track day’ type vehicle. This seat retains Racetech’s unique, patented, back mount design to give the driver ultimate support and a ‘feel’ of the chassis not available in basic floor-mounted seats. Customize your seat further with low base cushions or add side cushions for support in the thigh area.

The seats are finished with a black gloss shell made of GRP, black fire-retardant seat fabric and use black leather wear patches.

These 4119 seats without head restraints are not FIA homologated, but are ideal for HPDE / DE / track day cars, offroad desert trucks & outlaw drag cars when drivers can’t use a head restraint seat. They are HANS compatible.

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. Please contact us before ordering so we can confirm fitment for you. Have your year, make and model readily available please.

Made in Germany in collaboration with Bosch, this fuel pump is capable of supplying 1000HP gas engines with 415 lph at 40 psi. It can also do 350 lph at 80 psi and 750HP on E85, making it a very versatile pump. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 “e85”, at pressures between 70 and 100 psi.

The DW400 has a 46mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Deatschwerks 9-7010 install kit is designed for:

• 99-04 Chevrolet Silverado 1500
• 99-04 Chevrolet Silverado 2500
• 01-04 Chevrolet Silverado 3500
• 99-04 GMC Sierra 1500
• 99-04 GMC Sierra 2500
• 01-04 GMC Sierra 3500