Racetech seats are made in New Zealand and have quickly become very popular in the US for their high quality construction and driver comfort. With an integral head restraint, the 4009HR series of seats is a “go-to” safety essential for many forms of rally and road racing. This range of seats is suitable for competition where 270 degrees of head support is required or for any series requiring an FIA 8855-1999 homologated seat. Common applications range from club level racing to national competition, showing that this is not only a versatile seat, but also a seat for serious racers.

The seats are all HANS compatible and intended for use with a 5/6-point belt. The shell finish is gloss black and the seat cover is made of black fire-retardant fabric with grey suede wear patches.

If you are drag racing, new rules may require the use of a back mount with any fiberglass composite seat. Please check with your governing body.

Looking for a place to conveniently and safely store your phone in the car? The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with their ExactFit Screw-in Magnetic phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of the mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. The ball clasp provides an adjustable yet very firm grip, keeping the phone in the position you want.

This is the original folding tow hook that has proven itself 1000’s of times over the years. This new REV2 designed has many updates including an increased side load capacity. It is a fully machined tapered design with chamfered edges to eliminate cutting tow straps. “TOW” graphics are machined onto the loop, which is 2″ diameter as required by many organization. Rennline’s stainless steel folding race hooks install in minutes on any Porsche, BMW or Audi with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as “for decorative purposes only”, Rennline’s stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2″ opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional. A GoPro camera mount can be installed and is sold separately. This version fits the following cars:

• Front – BMW-3 Series-E46 M3 (2001-2005)
• Front – BMW-3 Series-E90 M3 (2006-2013)
• Front – BMW-3 Series-E92-93 M3 (2006-2013)
• Front – BMW-5 Series-E39 M5 (1998-2003)
• Front – BMW-5 Series-E60 M5 (2005-2010)
• Front – BMW-5 Series-E60/61 all noses (2003-2010)
• Front – BMW-5 Series-E60/61 dealer installed M-Sport bumper (2003-2010)
• Front – BMW-7 Series-F01/02 (2009+)
• Front – BMW-Z Series-E85 Z4 standard nose (2002-2008)
• Front – BMW-Z Series-E85 Z4M, Z4 M-Sport nose (2002-2008)
• Rear – BMW-3 Series-E90 M3 (2006-2013)
• Rear – BMW-3 Series-E92-93 M3 (2006-2013)
• Rear – BMW-5 Series-E39 M5 (1998-2003)
•  

A straightforward installation process coupled with an affordable price point has made Deatschwerks’ DW200 series fuel pumps a popular choice for high performance applications in need of a standard fitting pump. The DW200 series features the essential elements of a reliable fuel pump, but without the excess, making them the definitive no frills fuel pump. DW200 series fuel pumps flow 255lph at 40psi. The DW200 has a 39mm diameter and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Floor & Tunnel Shield IIâ„¢ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8″ composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation – aluminum side must face the heat source. At only 3/16″ thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.

Features :

• 10 mil dimpled aluminum face
• Protection for engine compartments
• Protection for painted body parts
• Comfortable interior at any temperature
• Hi-temp adhesive for a “do-it-once” install
• Extreme heat barrier – aluminum side should face the heat
• Only 3/16″ thick
• Use as barrier to reflect and insulate from any heat source
• Great for exterior applications

This sheet is 42 in x 48 in, approximately 14 square feet.

The Enduro Series of racing fuel cells by Fuel Safe offers full FIA-FT3 approval at an affordable price. Built from high strength molded “rubber” components. The Enduro Cell® is a favorite with off road racers and circle track teams. Designed for use with all hydrocarbon fuels and E85 blend and alcohol (alcohol use requires the removal of foam baffling). The Enduro Cell® line of fuel cells from Fuel Safe® delivers excellent performance at a great price.

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• SF6X10E aluminum fill plate comes with a -8 pickup, -8 return, -8 rollover vent valve, high quality threaded aluminum fill cap and a sending unit position.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Limited 5 year manufacturer warranty

Configuration for any cell variation is available upon request and can include – capacity, fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This listing is for the 25 Gallon capacity tank.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Pro Cell® offered by Fuel Safe is just as versatile as it is durable. No competitor can reach the excellence and guarantee of quality goods like Fuel Safe can. Pro Cells are designed specifically for use with hydrocarbon fuels but have been successfully used by top teams running ethanol blends up to and including E85. The Fuel Safe Pro Cell is the fuel cell of choice for top off road, road race and circle track racers around the globe. Pro Cell also has the ability to be create a seamless bladder design to any custom fuel cell.

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• 6 x 10 aluminum fill plate with a provision for a sending unit.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Collector system with three poly trap doors (upgrades available, or swap for surge tank)
• Limited 5 year manufacturer warranty

Configuration for any cell variation is available upon request and can include – capacity, fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This Aluminum tank has a 17 Gallon capacity.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Pro Cell® offered by Fuel Safe is just as versatile as it is durable. No competitor can reach the excellence and guarantee of quality goods like Fuel Safe can. Pro Cells are designed specifically for use with hydrocarbon fuels but have been successfully used by top teams running ethanol blends up to and including E85. The Fuel Safe Pro Cell is the fuel cell of choice for top off road, road race and circle track racers around the globe. Pro Cell also has the ability to be create a seamless bladder design to any custom fuel cell.

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• 6 x 10 aluminum fill plate with a provision for a sending unit.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Collector system with three poly trap doors (upgrades available, or swap for surge tank)
• Limited 5 year manufacturer warranty

Configuration for any cell variation is available upon request and can include – capacity, fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This Aluminum tank has a 29 Gallon capacity.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Sportsman® cell is their most cost effective soft bladder fuel cell. The Sportsman® cell meets all FIA-FT3 requirements and is designed for use with all hydrocarbon fuels. The Sportsman® bladders are constructed with a proprietary pre-coated fabric that offers a great balance of performance and price

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• SF6X10E aluminum fill plate comes with a -8 pickup, -8 return, -8 rollover vent valve, high quality threaded aluminum fill cap and a sending unit position.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Limited 5 year manufacturer warranty

The configuration for any cell model can be customized upon request and can include – fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This tank has a 12 gallon capacity.

Fuel Safe offers a variety of models for different applications and setups for fueling systems. The Sportsman® cell is their most cost effective soft bladder fuel cell. The Sportsman® cell meets all FIA-FT3 requirements and is designed for use with all hydrocarbon fuels. The Sportsman® bladders are constructed with a proprietary pre-coated fabric that offers a great balance of performance and price

Each complete Pro Cell® racing cell includes:

• Ultra tough, FIA-FT3 certified Pro Cell® bladder.
• Aluminum or Powder coated 20 gauge steel container with external mounting flange
• Full safety foam baffling, minimizes fuel slosh and the potential for an explosion. Please note that the use of ethanol blends may reduce the usable life of your foam.
• SF6X10E aluminum fill plate comes with a -8 pickup, -8 return, -8 rollover vent valve, high quality threaded aluminum fill cap and a sending unit position.
• Aircraft grade nut ring and gasket
• Fuel pickup assembly, factory installed
• Limited 5 year manufacturer warranty

The configuration for any cell model can be customized upon request and can include – fill option, pickup size, dual pickup option, return size, vent size, pickup location, and sending unit/fuel gauge.

Torqued recommends pairing these fuel cells with the Nuke Competition Fuel Cell Unit, a drop-in surge tank compatible with most standard fuel cells.

This tank has a 22 gallon capacity.