The MOMO MOD 31 steering wheel is a simple and timeless full round wheel.

MOD 31 is a flash back to MOMO’s first steering wheel. The rim is completely round and smooth with three anodized spokes and a flat undrilled dish. MOD 31 is wrapped in premium suede that extends inward to the two side spokes. It is small enough to fit in a small sedan with diameter options of 320mm and 340mm. The wheel has zero dish.

The MOMO Super Cup racing seat a Hans® compatible fiberglass seat and is approved by the FIA for quality and safety. Revolutionary quick-drying Airnet© material covers the seat’s back insert. Airnet© is the new technical material with incredible transpiration and strength characteristics. With Airnet©, the driving comfort will be excellent, thanks to greater air flow in the seat back and to the most effective moisture permeability. The Super Cup’s fiberglass seat shell is visible on the rear and the front portion is upholstered in self-extinguishing black fabric. Removable double leg cushions enhance support. This is the standard size version.

We ship worldwide MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition. The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience. Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car. When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position. The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation. The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions. The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking. This kit fits:

• Audi TT MK2 Coupe(8J 2006 – 2014) MSS part #02aAUDTT8JCP
• Audi TT-S MK2 Coupe (8J 2006 – 2014) MSS part # 02aAUDS8JCP
• Audi TT VR6 MK2 Coupe (8J 2006 – 2014) MSS part #02aAUDVR6CP
• Audi TT-RS MK2 Coupe (8J 2006 – 2014) MSS part #02aAUDRS8JCP
• Audi TT MK2 Roadster (8J 2006 – 2014) MSS part #02aAUDS8JRD
• Audi TT-S MK2 Roadster (8J 2006 – 2014) MSS part #02aAUDS8JRD
• Audi TT VR6 MK2 Roadster (8J 2006 – 2014) MSS part #02aAUDVR6RD
• Audi TT-RS MK2 Roadster(8J 2006 – 2014) MSS part #02aAUDRS8JRD
• Volkswagen MK5 R32 only (2003 – 2009) MSS part #02aVWG5R32HB
• Volkswagen MK6 GTI (2009 – 2014) MSS part #02aVWG6GTIHB
• Volkswagen MK6 TDI (2009 – 2014) MSS part #02aVWG6TDIHB

Pair of rear brake pads for Chevrolet Camaro. Can fit multiple other Chevy and Cadillac models. Racing oriented and built to withstand high temperatures. See full fitment list below.

RSL29 Compound Overview

The Pagid RSL29 compound, formerly known as Pagid RS29, is a long time favorite and reliable pad. It features very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Combined with easy bedding-in behavior, this compound is very popular in club racing, for track days, GT cars, touring cars and prototype endurance racing. Due to the excellent modulation characteristics, the RSL29 pads is also often used in sprint races.

Model Compatibility

• Cadillac CTS-V (4 piston front caliper) 03 – 09
• Cadillac CTS-V (6 piston front caliper) 10 – 14
• Chevrolet Camaro SS [Gen 5] 09 – 15
• Chevrolet Camaro ZL1 [Gen 5] 12 – 15
• Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 +

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a plate on the front. The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s tow hook receiver license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. These assemblies are height adjustable. Excellent for cars with aftermarket bumpers who are not able to use on our license plate mounts designed for use in the factory tow hook boss. Also available in a number of different angles to hug conform with the bumpers curvature. All components are stainless, powder coated or anodized to withstand daily driving conditions. Insert measures 117mm, meaning it will fit tow hook holes that measure 117mm or less. This model is designed fo fit U.S. issued license plates. An import / European option is available through Rennline, contact us for more information. Unsure whether or not this Rennline Tow Hook License Plate Mount is right for your car? Get in touch with us to find out! Note:Will not work on 991’s with parking sensors or 2018 Panameras

SOBEK Motorsport fuel / oil filter in

The motorsport fuel or oil filters made by SOBEK Motorsport are designed to operate at 30 bar of pressure, but have been tested to work at 50 bar. This is the 10 micron, Type 7 size with AN-6 female connections version. See below for exact size.

The filters are also available in a variety of other standard lengths and filtration sizes. Type 3, 4, 5 and 7 size are available, the dimensions of which are shown below:

The filtration element can also be selected in 10, 25, 60 and 150 micron for most lengths:

The GP-6S is a high end, yet moderately priced sport driver helmet, as designated by the “S.” The shell shape is the same as the GP-6 (PED) and state-of-the-art GP-6RC, along with the same wider eye port for increased peripheral vision. The single intake/single exhaust vents provide excellent ventilation performance. Get all of the performance at a lower price tag.

Head and Neck Restraint devices with the standard 6mm helmet bolt can be easily added with the new M6 washer nut installed at the factory. The helmet is SA2015 certified.

This is the black frost M version.

Positive Latch Shield
Positive latch mechanism provides solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.

Wider Eyeport
Wider eye port for increased peripheral field of view, when compared to the previous 5 series.

M6 Anchor Type
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.

E-ject Ready Crown Pad
Pre-cut pocket, under crown pad, can be easily removed to accomodate optional E-Ject(R) system.

New Shield Pivot Hardware
New shield pivot hardware, with redesigned track slider that improves aerodynamics. New wider 6 series shield & eye port, for increased peripheral field of view when compared to the previous 5 series. Shield, pivot hardware and wider eye port were developed on the RC and adapted to the GP-6S.

Ventilation
Large, closable, intake vent combined with a larger 10mm hole greatly increases air intake. Larger 10mm rear vent hole further increases airflow.

New Chinbar
Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed as well as lowers the Center of Gravity. Rise in shell above the shoulders for added clearance.

The GTX3 features a lightweight carbon composite shell and sleek aero styling for enhanced performance at higher speeds. The GTX3’s integrated double screen anti-fog (DSAF) shield and rear-facing vents allow air exchange and clear vision while preventing dust and dirt from entering the helmet, making it an ideal choice for racers competing in dirt-track forms of racing in addition to open wheel, formula and karting.

Features:

Based on the HP7 design and featuring a lightweight carbon composite shell using Bell’s high-pressure proprietary molding system, the RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance and energy absorbing capacities. The sleek, aerodynamic design features an advanced ventilation system with 14 intake and extraction channels that can be used with or without air intake covers. The RS7 double screen anti fog (DSAF) visor and rubber gasket seal ensures air, water and dust will not enter the eyeport.

This is the white 57 cm (7 1/8″) head size version.

Features

• Based on the Innovative HP7
• Lightweight Carbon Composite Shell
• High-Pressure Molding System for Improved Shell Strength
• Advanced Ventilation System with 14 Intake and Extraction Channels
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dust Can’t Penetrate into the Helmet
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds
• Adaptable for Closed Car Forms of Racing with Top Forced Air Inserts Including Eyeport, 8 Hole and 10 Hole Options to Improve Internal Ventilation When Used with Forced Air System (Sold Separately)
• Non Ventilated RS7 Available for Dirt Track Style Racing
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrated Drinking Tube Systems and Radio Microphone Systems
• Ultra Plush Grey Comfort-Max FR Interior Fabric for Improved Comfort and Superior Moisture Wicking Properties
• Pro-Style, Multi Foam Density Interior with Contoured Cheek Pads for Professional Fit
• Narrow Size Eyeport
• SE07 3MM DSAF Shield (SV SE07 Pivot System) – Clear Shield
• Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance
  M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Sizes 7 1/8 (57) to 7 5/8+ (61+)
• Available in White or Matte Black
• Available in Non Ventilated RS7 SC Graphic
• Snell SA2015 Homologation
• FIA8859-2015 Homologation

Size chart

All SA2015 helmet sales are final sale with no returns.

BSCI is offering an innovation for occupant protection in vehicles outfitted with a roll cage. Our dual durometer padding takes SFI 45.1 roll bar padding a step further combining a soft texture with a SFI 45.1 approved core material. We have listened to customers and developed a product that is especially advantageous to the street driven race car as well as for those racers who prefer the soft touch characteristics when it comes to padding but also want to provide themselves with the protection only BSCI 45.1 approved padding can provide.

The dual durometer padding is constructed in two pieces. The outer surface is very durable, soft touch foam and the inner padding is SFI 45.1 approved. With this combination, lower speed impacts feel much softer than with just the SFI approved padding but when higher speed impacts occur, the SFI 45.1 approved core reduces the chances of serious injuries. Best of all, it will meet all sanctioning body requirements where SFI 45.1 approved padding is mandated.

The manufacturing process is done so that the outer soft padding can be removed when needed. This padding is especially good in high traffic areas where normal padding starts to deteriorate due to contact with the body. Locations such as door bars or anywhere that parts of the body are in constant contact with the roll cage is where the dual durometer padding is best utilized.