The MOMO MOD. 08 steering wheel has a deep 88mm dish, which is useful for older cars where the seating position is often further back. It also provides extra leverage for cars without power steering. The wheel features a 350mm diameter and a yellow centering stripe is also integrated into the design.

The wheel is available in black leather or suede finish and comes with a horn button. It is pre-drilled with the standard 6-bolt pattern.

The MOMO MOD 31 steering wheel is a simple and timeless full round wheel. MOD 31 is a flash back to MOMO’s first steering wheel. The rim is completely round and smooth with three anodized spokes and a flat undrilled dish. MOD 31 is wrapped in premium suede that extends inward to the two side spokes. It is small enough to fit in a small sedan with diameter of 320mm on this version.

The MOMO Super Cup racing seat a Hans® compatible fiberglass seat and is approved by the FIA for quality and safety. Revolutionary quick-drying Airnet© material covers the seat’s back insert. Airnet© is the new technical material with incredible transpiration and strength characteristics. With Airnet©, the driving comfort will be excellent, thanks to greater air flow in the seat back and to the most effective moisture permeability. The Super Cup’s fiberglass seat shell is visible on the rear and the front portion is upholstered in self-extinguishing black fabric. Removable double leg cushions enhance support. This is the larger XL size version.

MSS Triple Engineered Technology adjustable spring kits put the driver in full control of their ride and handling experience. MSS utilizes two active springs with three separate spring rates: the single rated orange spring and the dual rated black spring. This combination delivers a huge range of capability in operation – a smooth and almost linear transition.

The relatively low initial spring rate absorbs small bumps in the road, thereby increasing grip. It then transitions to a secondary spring rate which enhances vehicle handling during cornering, giving you the ultimate control of your driving experience.

Thanks to its patented, triple stack spring technology, MSS can for the first time, deliver improved performance, comfort and safety, within one product – and without compromise.

Superior Performance

Two active springs and three separate spring rates deal with a much wider range of situations when driving near the limits. Distinct benefits from the reduced roll and pitch – whether it be dive or a squat, enables you to turn sharper, brake later and accelerate sooner respectively.

Unparalleled Comfort

Shocks and vibrations caused by bumps and the roughness of the road surface are both more effectively absorbed by the dual stacked, triple rated springs – rather than being transmitted through to the cabin as jolting and distracting road noise.

How it works

The black MSS Ride Enhancer keeps the MSS Ride Controller properly seated against the suspension, so you can push the limits of your car.
When cornering hard and wheels lifts off the ground, the active coils of the tender spring hold the MSS Ride Controller in position.

The central coupler provides a firm base for the springs to seat on. It retains spring alignment and help the components perform to their max. The lightweight, chamfered design of the coupler ensures the springs do not catch on the edges when in operation.

The Ride Adjuster has been designed to enable ride-height adjustment to your specific requirements. At the turn of the wrench, you can fine-tune your vehicle for road, dirt and race circuit conditions.

The orange MSS Ride Controller was developed by MSS and is manufactured by Eibach, the world leader in springs. It specifically works on enhancing performance handling and comfort on both wet and dry roads. Along with the shock absorber, the single rated, heavy duty spring stabilizes your vehicle during acceleration, steering, cruising and braking.

This kit fits:

• BMW 1-Series F20 Hatchback 5-door – MSS part # 02aBMW1F20HB Please contact us before installing
• BMW 1-Series F21 Hatchback 3-door – MSS part # 02aBMW1F21HB Please contact us before installing
• BMW 2-Series F22 Coupe – MSS part # 02aBMW2F22CP Please contact us before installing
• BMW 2-Series F23 Cabriolet – MSS part # 02aBMW2F23CB Please contact us before installing
• BMW M2/Competition F87 Coupe – MSS part # 02aBMW2F87CP
• BMW 3-Series F30 Sedan – MSS part # 02aBMW3F30SN Please contact us before installing
• BMW M3 F80 Sedan – MSS part #02aBMW3F80SN
• BMW 4-Series F32 Coupe – MSS part # 02aBMW4F32CP Please contact us before installing
• BMW 4-Series F33 Cabriolet – MSS part # 02aBMW4F33CB Please contact us before installing
• BMW 4-Series F36 Gran Coupe – MSS part # 02aBMW4F36GC Please contact us before installing
• BMW 4-Series F82 Coupe – MSS part # 02aBMW4F82CP Please contact us before installing
• BMW 4-Series F83 Cabriolet – MSS part # 02aBMW4F83CB Please contact us before installing
• BMW M4

Instead of buying individual items for an aftermarket seat install, Pro Car Innovations Racing Spec Seat Mounts makes the process easy and pain-free. Finding the correct seat brackets can be almost impossible where most end up with a self-fabricated mount. PCI has invested the research in order to create an ingeniously crafted safe design that’s easily adjustable to accommodate multiple applications. The PCI Racing Spec Seat Mount Has the largest range of adjustment and lowest possible seat fitment of our seat mount line.

1/8” Steel vs. 3/16” steel
PCI mounts are laser cut and cnc formed completely from one piece for strength, stiffness and weight savings. With our design we can achieve the same strength if not more than 3/16″ steel by having bends and altering the shape to areas where increased strength and stiffness is required. So don’t be fooled by thicker heavier steel is better. 3/16” steel is more widely used for the simplicity of design and manufacturing. When you weld on the mounting legs 3/16″ steel is your only design option. Our mounts exceed the strength of the seat and floor they’re bolted to.

Features and benefits:

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel
• One piece mounting base design
• Multi direction adjustability
• 5 and 6 point sub belt mounting locations
• Single tool adjustments with bottom locking hardware
• Zinc plated grade 8 hardware
• Powder coated mounting base and side mounts
• Stainless steel laser etched bolt on logo plates
• 1/4″ x1.25″ round black nylon side mount spacers included in kit
• Uniquely designed for each vehicle for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• 5 and 6 point sub belt mounting
• Hassle free easy installation
• Custom side mount options available

Base and Bracket dimensions:

– 12 5/8″ (320mm) to 19 1/2″ (495mm)
– 6”­(152mm) range front to back adjustments

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a plate on the front. The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s tow hook receiver license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. These assemblies are height adjustable. Excellent for cars with aftermarket bumpers who are not able to use on our license plate mounts designed for use in the factory tow hook boss. Also available in a number of different angles to hug conform with the bumpers curvature. All components are stainless, powder coated or anodized to withstand daily driving conditions. Features a universal type fitment. This model is designed fo fit U.S. issued license plates. An import / European option is available through Rennline, contact us for more information. Unsure whether or not this Rennline Tow Hook License Plate Mount is right for your car? Get in touch with us to find out!

• Audi A8, S8 D4 (10+)
• Audi E-Tron (All))
• Audi Q3 (All))
• Audi Q7 (All))
• Audi Q8 (All))
• Porsche Macan with and without parking sensors (14-18)
• VW Touareg (02-09)

This valve can be used in a variety of installations, include the protection of pipeline systems, tanks and other fluid containers from overpressure. It is compatible with fuel, air, water and oil and can be mounted in any position.

Features :

• Housing material: Aluminium EN-AW 7075
• Sealing material: BF750
• Black anodized surface
• Application fuel, oil, air, water (with EPDM sealing)
• Opening pressure 5 mbar
• Maximum pressure loss 50 mbar
• Burst pressure 170 bar

Standard version is AN-6 threads. Other threads available upon request.

Pressure is selectable by customer. Please email [email protected] after purchase with the desired pressure.

The Arai GP-J3 is another representation of Arai’s pursuit of comfort and function in one attractive package whose simplicity and smooth lines belie the complex energy-management system within. The updated and improved shell shape and construction incorporate extended facial coverage with sculpted “FCS” cheek pads for improved support and comfort. The same care and attention that Arai puts into every helmet can be found in the details of the GP-J3 open-face series. The interior fit is typical Arai, benefiting from over 50 years of research and refinement, and resulting in a helmet that more closely matches the shape of the human head. The fit is close but remarkably comfortable, allowing for the smallest possible helmet to be worn for maximum protection. Meets Snell SA2020 & FIA 8859-2015 standards. This is the black L version.

Adjustable Peak GP-J3 has an adjustable peak that combines the adjustability of the previous Jet/f with the classic rounded styling of a more traditional vintage design. The peak also includes easily-removable/replaceable light tint anti-glare lens.

Cheek Pads and the Comfort Head Liner Removable and replaceable with optional pads of various thicknesses for a more custom fit, as well as allowing for more frequent, and more thorough, cleaning when needed.

Ventialtion The GP-J3 has four top vents, giving the Jet series its first-ever ventilation system.

M6 Anchor Type Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.

Low Center of Gravity Combined with its legendary comfort and fit, Arai concentrates on balance and a lower center of gravity. All too often, people concentrate more on the weight of a helmet instead of how that weight is distributed over the entire helmet. A lower center of gravity causes less fatigue and feels lighter on the wearers head over a full track session.

Size Guide

The K.1 Pro is a multi-use, full-feature helmet with superior ventilation, Aero styling and Bell’s aggressive chin bar design and front chin gurney (Duckbill). The K.1 Pro is a great helmet for open wheel racers, closed car racers and kart racers who demand superior features including light weight, excellent fit and multiple ventilation options. The K.1 Pro can be used in an open wheel configuration with air intake and with a closed car configuration with top forced air insert. The K.1 Pro includes a top air intake for pavement applications and vent plugs for dirt applications.

Features

• All-Purpose, Versatile Helmet
• Aggressive Bell Aero Styling
• Lightweight Composite Shell
• Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection
• Integrated Channels in the Face Piece Offer Multiple Options to Install Integrate Radio Microphone Systems
• Black Comfort-Plus FR Interior Fabric for Durable Performance
• Multi Foam Density Standard Interior For Outstanding Fit
• Superior Ventilation System Includes Direct Flow Upper and Lower Chin Bar Vents, Ten Intake and Extraction Vents and a Clear .200 mm Air Intake Vent
• K.1 Pro includes Top Forced Air Intake and Vent Plugs for flexibility of racing application
• Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dirt Can’t Penetrate into the Helmet
• Standard Size Eye port
• 287 3mm SRV Shield (SRV-1 Pivot System) – Clear Shield
• M6 Terminal Hardware for Head and Neck Restraint Devices
• Draw String Helmet Bag Included
• Hex Wrench Included
• Snell SA2015 Homologation
• White color and size medium version

Size chart

BSCI pioneered the innovation and development of roll bar padding that set the industry standard. Both the half round shape and SFI safety standards resulted from lobbying and research and development initiated by BSCI. Today, we are still the leader in development of energy management foams for use in protecting drivers and occupants from more serious injuries when interior roll cages are contacted. BSCI SFI padding is used extensively throughout the USA and in global motorsports venues. Always turn to BSCI for the best in roll bar padding products.

• Tested extensively under rigorous impact and flammability standards
• Available in colors Black, Red and Blue
• Formulated for maximum impact absorption using our superior technology
• Will not melt or drip in a fire and the padding is self-extinguishing
• Acrylic adhesive molded within padding for easy installation
• Easy to cut and shape for custom installation

Features:

• 3/4″ thickness to fit 1 & 1/2 – 2″ bar diameter
• Padding is 36″ in length