Deatschwerks 440lph In-Tank Brushless Fuel Pump, PMW Controller & 9-0903 Install Kit
Deatschwerks 440lph In-Tank Brushless Fuel Pump, PMW Controller & 9-0903 Install Kit
$579.00
- Capable of flowing 440 LPH at 40 psi
- Dual-speed controller allows you to operate at a low duty cycle during normal driving conditions and full-cycle under heavy loads
- Capable of supporting 1000HP on gasoline and 750 HP on E85
- Brushless design
- Includes controller harness with leads
- Includes hose and hose clamps
- Includes fuel filter sock
- Includes fuel pump to bulkhead harness
- Includes 4-wire bulkhead with O-ring and retainer clip
Description
The brushless DW440 delivers a lot of flow in a small package. With standard 13.8v battery voltage, the pump flows 440LPH at 40PSI to support 1000hp on gas and 750hp on e85. If even more flow is needed, the 40amp controller and brushless design make this pump an ideal candidate for use at voltages beyond typical 13.8 battery voltage. The pump and controller have been endurance tested at voltages up to 24v. At a recommended max intermittent voltage of 20v, the DW440 flows 620LPH at 40psi.
Model Compatibility
- Mazda Miata 1989-2005
- Subaru Impreza 1993-2007
Specifications
| Location | In-tank | See more like this |
|---|---|---|
| Flow Rate | 440lph | See more like this |
| Fitment kit included | Yes | See more like this |
| Fitment | Mazda | See more like this |
Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 1990 | Mazda | Miata | ||
| 1991 | Mazda | Miata | ||
| 1992 | Mazda | Miata | ||
| 1993 | Mazda | Miata | ||
| 1994 | Mazda | Miata | ||
| 1995 | Mazda | Miata | ||
| 1996 | Mazda | Miata | ||
| 1997 | Mazda | Miata | ||
| 1999 | Mazda | Miata | ||
| 2000 | Mazda | Miata | ||
| 2001 | Mazda | Miata | ||
| 2002 | Mazda | Miata | ||
| 2003 | Mazda | Miata | ||
| 2004 | Mazda | Miata | ||
| 2005 | Mazda | Miata | ||
| 1993 | Subaru | Impreza | ||
| 1994 | Subaru | Impreza | ||
| 1995 | Subaru | Impreza | ||
| 1996 | Subaru | Impreza | ||
| 1997 | Subaru | Impreza | ||
| 1998 | Subaru | Impreza | ||
| 1999 | Subaru | Impreza | ||
| 2000 | Subaru | Impreza | ||
| 2001 | Subaru | Impreza | ||
| 2002 | Subaru | Impreza | ||
| 2003 | Subaru | Impreza | ||
| 2004 | Subaru | Impreza | ||
| 2005 | Subaru | Impreza | ||
| 2006 | Subaru | Impreza | ||
| 2007 | Subaru | Impreza | ||
| 1993 | Toyota | Supra | ||
| 1994 | Toyota | Supra | ||
| 1995 | Toyota | Supra | ||
| 1996 | Toyota | Supra | ||
| 1997 | Toyota | Supra | ||
| 1998 | Toyota | Supra |
Details
| Manufacturer Part # | 9-441-C103-0903 |
|---|---|
| Weight | 2.00 lbs (0.9 kg) |
| Height | 2" (5.1 cm) |
| Width | 4" (10.2 cm) |
| Length | 6" (15.2 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
