Deatschwerks 440lph In-Tank Brushless Fuel Pump with Single/Dual Speed Controller Install Kit
Deatschwerks 440lph In-Tank Brushless Fuel Pump with Single/Dual Speed Controller Install Kit
$529.00
- Capable of flowing 440 LPH at 40 psi
- Capable of supporting 1000HP on gasoline and 750 HP on E85
- Brushless design
- Dual-speed controller allows you to operate at a low duty cycle during normal driving conditions and full-cycle under heavy loads
Note: This item may take 1-2 extra days to ship
Description
DeatschWerks DW440 brushless in-tank electric fuel pumps have a total height of only 4 in., making them easy to retrofit into any OE pump module. Brushless technology reduces friction and heat, increases efficiency, vastly improves pump lifespan in ethanol and methanol fuels—and allows higher voltage inputs for increased flow! These pumps move 440 lph of fuel at 40 psi. Each fuel pump includes a controller, which accepts an 8-22 V DC input and creates a digital signal to allow precise speed and torque control. The controllers are available in three configurations: single speed, dual speed, and PWM-controlled. Controller are designed to be used with voltage boosters, and the pump kits also include bulkhead wiring.
Model Compatibility
- Mazda Miata MX-5
- Subaru Impreza 1993-2007
Specifications
| Location | In-tank | See more like this |
|---|---|---|
| Flow Rate | 440lph | See more like this |
| Input Fitting | 11mm | See more like this |
| Output Thread | 3/8″ | See more like this |
| Fitment kit included | Yes | See more like this |
| Fitment | Universal | See more like this |
Fitment
| Year | Make | Model | Trim | Notes |
|---|---|---|---|---|
| 1990 | Mazda | Miata | ||
| 1991 | Mazda | Miata | ||
| 1992 | Mazda | Miata | ||
| 1993 | Mazda | Miata | ||
| 1994 | Mazda | Miata | ||
| 1995 | Mazda | Miata | ||
| 1996 | Mazda | Miata | ||
| 1997 | Mazda | Miata | ||
| 1999 | Mazda | Miata | ||
| 2000 | Mazda | Miata | ||
| 2001 | Mazda | Miata | ||
| 2002 | Mazda | Miata | ||
| 2003 | Mazda | Miata | ||
| 2004 | Mazda | Miata | ||
| 2005 | Mazda | Miata | ||
| 1993 | Subaru | Impreza | ||
| 1994 | Subaru | Impreza | ||
| 1995 | Subaru | Impreza | ||
| 1996 | Subaru | Impreza | ||
| 1997 | Subaru | Impreza | ||
| 1998 | Subaru | Impreza | ||
| 1999 | Subaru | Impreza | ||
| 2000 | Subaru | Impreza | ||
| 2001 | Subaru | Impreza | ||
| 2002 | Subaru | Impreza | ||
| 2003 | Subaru | Impreza | ||
| 2004 | Subaru | Impreza | ||
| 2005 | Subaru | Impreza | ||
| 2006 | Subaru | Impreza | ||
| 2007 | Subaru | Impreza | ||
| 1993 | Toyota | Supra | ||
| 1994 | Toyota | Supra | ||
| 1995 | Toyota | Supra | ||
| 1996 | Toyota | Supra | ||
| 1997 | Toyota | Supra | ||
| 1998 | Toyota | Supra |
Details
| Manufacturer Part # | 9-441-C102-0903 |
|---|---|
| Weight | 2.00 lbs (0.9 kg) |
| Height | 2″ (5.1 cm) |
| Width | 4″ (10.2 cm) |
| Length | 6″ (15.2 cm) |
| CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer’s spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at [email protected]. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part’s use on a vehicle which is not emissions controlled.
Free Shipping Details:
- Applies to in stock items only
- Valid in lower 48 US states, excluding HI, AK and US Territories
- Ships via ground service
