415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$240.00
$215.95
Unterminated Input/Output wiring
More details | Click to see if this fits my vehicleSKU #: HOE-3558-456
Manufacturer Part #: 558-456
The 558-456 wiring kit is intended to fully populate all of the inputs and outputs for PNs 553-111 and 553-112 Pro Dashes. These can easily be inserted into the existing 34 pin dash connector. It contains loose wires and 2 and 3 conductor cable (jacketed but not shielded). The wire is 20
gauge TXL. There are TE Superseal pins crimped on every wire and cable. There are also extra pins that can be used
(likely needed when using the jacketed cable for more than one sensor). The kit contents include the following. The
installer can choose to match the color and functions given in the instructions for consistent installations.
17 loose wires (10 feet each) with crimped tyco pins, in various colors.
2 Conductor Cable (Black/Blue) 20 Feet
3 Conductor Cable (Orange/Green/Black)40 Feet
Superseal Pins 20
Superseal Plugs 20
Made by | Holley EFI |
---|---|
Manufacturer Part # | 558-456 |
GTIN | 090127101780 |
Weight | 2.00 lbs (0.9 kg) |
Height | 3.3" (8.4 cm) |
Width | 10.5" (26.7 cm) |
Length | 11.2" (28.4 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.