415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$1,167.00
$1,049.95
Blackheart Header-Back Exhaust System; Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;
More details | Click to see if this fits my vehicleSKU #: HKR-3BH23115
Manufacturer Part #: BH23115
Finish off your Gen III HEMI Swap project with the finest exhaust system available for your 1970-1974 Mopar E-Body. Features 3" diameter, straight through 304 stainless steel, zero restriction mufflers, and 304 stainless steel mandrel bent exhaust tubing. Specifically designed for Gen III HEMI swap vehicles and a direct fit to BH2358 Long Tube Headers. Slip couplers allow the first 24" of the head pipes to be dropped in seconds, allowing the transmission to be easily removed for service. High tuck design for best possible ground clearance on lowered cars. Rectangular polished exhaust tips fit below the rear valance panel (designed for use with plain rear valance panel that does not have cutouts or notches at the bottom). Additional 2.5" dual exhaust systems will be released for the E-body at a later date.
California Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Year | Make | Model | Trim | Notes |
---|---|---|---|---|
1970 | Dodge | Challenger | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1971 | Dodge | Challenger | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1972 | Dodge | Challenger | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1973 | Dodge | Challenger | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1974 | Dodge | Challenger | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1970 | Plymouth | Barracuda | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1971 | Plymouth | Barracuda | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1972 | Plymouth | Barracuda | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1973 | Plymouth | Barracuda | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only | |
1974 | Plymouth | Barracuda | Dual 3 in. 304 Stainless Steel Tubing; Incl. Tubing/X Pipe/Hangers/Hardware/Rectangular Polished Tips;Intended For Race Use Only |
Made by | Hooker |
---|---|
Manufacturer Part # | BH23115 |
GTIN | 090127126981 |
Weight | 61.00 lbs (27.7 kg) |
Height | 19.5" (49.5 cm) |
Width | 16" (40.6 cm) |
Length | 52.5" (133.4 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.