415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
AlphaLoc intercooler and coolant tube couplers from Linder Power Systems are the go-to connectors for boosting your engine. The new AlphaLoc couplers for your aluminium tube connecting needs are unlike anything currently available on the market. They are a spring loaded assembly with a fast thread and locking detent, use double o-ring sealing and don't need any tools to disassemble or reassemble. They also can't get stuck and lock harder as pressure increases, yet they still have flex to allow for engine movement. Linder Power Systems has tested them to 160psi without failure, and are very proud of the design and aesthetics. Available now in 2", 2.5", 3", 3.5" and 4" inner diameter and black or purple finish.
Note: When fabricating a system with AlphaLoc couplers make sure they will not be put in a mechanical load by movement of components. Also take care to not overheat and anneal the ferrules with the pins in them. We recommend welding about an inch and letting cool then repeat. If the ferrules are annealed the pins can elongate their holes and the couplers can leak or fail.
|Manufacturer Part #
|1.00 lbs (0.5 kg)
|2.5" (6.4 cm)
|4.6" (11.7 cm)
|4.5" (11.4 cm)
|Yes (see note below)
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.