415-767-6905 | help@torqued.io
There was an error
If you believe this is incorrect, please contact us at help@torqued.io.
$499.50
SKU #: NUK-15001207
Manufacturer Part #: 150-01-207
The Nuke Performance 2G 3 liter fuel surge tank can be run in a dual or single internal pump setup. The two pumps combine to output into a single 7/8 NPT outlet which can supply steady fuel flow for over 1600 HP. Fuel pumps are mounted with the billet internal mounting bracket. A 7/8 NPT to AN10 fitting is supplied. With this tank you minimize the risk of fuel starvation when running at low fuel levels and where the fuel system can't cope with the extremely hard driving such as drifting, drag racing and track days. By generating higher g forces, fuel can be pushed to one side or sloshed around too much causing starvation to the high pressure pump that supplies the fuel rail. This is a potentially catastrophic situation, particularly in turbo applications, but also on naturally aspirated engines. With a high quality fuel surge tank like this designed for use with top tier pumps, fuel starvation should never happen. As is the hallmark of Nuke Performance products, this tank is designed and manufactured to handle extreme amounts of power. Designed to stand up to the destructive properties of alcohol fuels, including methanol and ethanol. For use on turbo-charged, super-charged and naturally aspirated engine applications. Delivered with stainless-steel mounting plate for easy mounting, 3x 3/4 UNF AN8 fittings and 1x 7/8 UNF AN10 fitting for all the top cover connections. Any 3/4 UNF AN6-AN10 or a 7/8 UNF AN12 fitting can be used if desired. No fuel pumps are included. This fuel surge tank is designed for use with Deatschwerks DW400 pumps.
Volume | 3 liters | See more like this |
---|---|---|
Ports | 5 | See more like this |
Inlet Port Size | 3/4 UNF | See more like this |
Outlet Port Size | 7/8 UNF | See more like this |
Pump Compatibility | Deatschwerks 200 / 300 / 400 | See more like this |
Pump Location | Internal | See more like this |
Manufacturer Part # | 150-01-207 |
---|---|
Country of Manufacture | Sweden |
Weight | 6.34 lbs (2.9 kg) |
Height | 5.8" (14.8 cm) |
Width | 10.0" (25.5 cm) |
Length | 5.8" (14.8 cm) |
CARB compliant | Yes (see note below) |
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at help@torqued.io. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.