415-767-6905 | email@example.com
There was an error
If you believe this is incorrect, please contact us at firstname.lastname@example.org.
Nuke Performance FPR100m AN-8 Fuel Pressure Regulator: Redefining versatility of motorsports fuel management.
The next generation regulator, the ultimate replacement for the classic FPR90. This is an ethanol-proof fuel pressure regulator with a slim design and easy-to-mount stainless steel brackets. Every unit is thoroughly tested before delivery, with unmatched functionality, and with the same high quality as always.
Universal motorsports regulator
Approved for 500-1200hp
Safe for petrol, methanol, and ethanol
Every unit performance tested
Adjustable up to 100 PSI (7 bar)
1:1 boost reference
Stainless steel mounting bracket
AN-8 ORB inlets/outlet
The most useful 1:1 boost reference fuel pressure regulator on the market, easy to adapt to most installations, regardless of flow and horsepower. Help you tie together simple or complex fuel systems for all types of tuning or motorsports engine setup. Redesigned with precision functionality in focus. Lightweight design with the same hallmark as the entire Nuke Performance range of motorsports parts, with an integrated stainless steel bracket for safe and easy mounting for all applications and installations.
Developed from the extreme demands from motorsport The fuel pressure regulator FPR100m AN-8 is co-developed with worldwide motorsports teams and fuel pump manufacturers. This fuel pressure regulator is set to perform under every thinkable condition, and for most horsepower requirements. The fuel pressure regulator FPR100m AN-8 is the next level replacement for the classic FPR90, taking the classic AN-8 design into the FPR100-series, the newest generation fuel pressure regulators.
Fully adjustable between 30 PSI and 100 PSI (2-7 BAR)
AN-8 ORB inlet and outlet, approved for 500-1200 hp
The FPR100m is fully adjustable between 2 and 7 BAR (30-100 PSI), ready for installations between 500-1200 horsepower. This AN-8 fuel pressure regulator has the highest flow capacity for its size thanks to its oversized chamber, outlet, and inlet ports. Ready for AN-8 ORB fittings, delivered with an AN-8 ORB plug for a single inlet setup. The FPR100m is a product that evolved out of our life at the race track and takes its place in between the FPR100s and FPR100x.
|Manufacturer Part #||300-02-203|
|Country of Manufacture||Sweden|
|Weight||1.21 lbs (0.6 kg)|
|Height||1.8" (4.6 cm)|
|Width||3.1" (8 cm)|
|Length||2.1" (5.3 cm)|
|CARB compliant||Yes (see note below)|
Size and weight of different configurations may vary. For exact product weight and dimensions, please refer to the manufacturer's spec sheets or sizing sheets included in the description above or contact us.
CARB and EPA Emissions Statement: Based on the information provided to us by manufacturers and our own knowledge, we do the best we can to determine the CARB and emissions legality of the parts we sell. Please do your own research with the manufacturer to ensure that this part is legal for use in your state on the car you will be installing it on. If you believe that this part is incorrectly listed, please let us know at email@example.com. Parts which are not legal for use on emissions controlled vehicles in California and states which follow California CARB rules will require an affidavit to be signed by the customer certifying the part's use on a vehicle which is not emissions controlled.